HCS01.1E-W0013-A-02-B-ET-EC-CN-S4-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911374810
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
30 Seconds
The Bosch Rexroth Indramat HCS01.1E-W0013-A-02-B-ET-EC-CN-S4-NN-FW is part of the HCS IndraDrive Controllers series and features a MultiEthernet communication interface with a basic control section design. The drive controller has an IP20 rating, a peak current of 13 Amps, and supports encoder interfaces such as IndraDyn Hiperface and EnDat 2.1/2.2. It uses internal air cooling through an integrated blower and operates with a mains voltage of 3 x AC 110 to 230 V.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0013-A-02-B-ET-EC-CN-S4-NN-FW is a drive controller produced by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. As a compact axis inverter, it provides closed-loop speed and torque control for servo or induction motors in packaging, printing, and general automation equipment. The unit is used within an IndraDrive stack and works with a separate control section, allowing coordinated operation in multi-axis systems. Its compact format supports cabinet-based installation where several motion axes must be arranged within a limited amount of space.
The controller includes MultiEthernet communication, so the same hardware platform can be used with EtherNet/IP, PROFINET, or EtherCAT. The power stage accepts a three-phase supply of 3 x AC 110–230 V ±10%, which suits low-voltage industrial installations in a wide range of facilities. During acceleration peaks, the inverter can deliver up to 13 A, allowing it to handle short burst loads without tripping. The housing is rated IP20, so the unit must be installed inside a cabinet to prevent accidental contact with energized parts. Heat is removed by internal air cooling, with an integrated blower moving air through the heat sink to maintain operating temperature.
On the logic side, the unit is supplied with a BASIC control section, which provides the core motion functions required for standard axis tasks. The controller is identified as design version 1, indicating the product generation used for this configuration. For motor feedback, the first encoder connection supports IndraDyn Hiperface/EnDat 2.1/2.2, allowing position data to be processed with compatible drive systems. A native CANopen channel is also available for decentralized I/O or connection to legacy devices. This combination of control, feedback, and network options makes the unit suitable for compact distributed motion applications that require flexible communication and reliable axis control.
Frequently Asked Questions about HCS01.1E-W0013-A-02-B-ET-EC-CN-S4-NN-FW:
Q: What communication interface does the HCS01.1E-W0013-A-02-B-ET-EC-CN-S4-NN-FW controller use?
A: This model supports MultiEthernet communication for flexible network connectivity.
Q: How is the HCS01.1E-W0013-A-02-B-ET-EC-CN-S4-NN-FW drive controller cooled?
A: The HCS01.1E-W0013-A-02-B-ET-EC-CN-S4-NN-FW controller features an air cooling method via an integrated internal blower.
Q: What is the device peak current rating for the HCS01.1E-W0013-A-02-B-ET-EC-CN-S4-NN-FW controller?
A: This controller has a device peak current of 13 A for demanding applications.
Q: What mains voltage range does the HCS01.1E-W0013-A-02-B-ET-EC-CN-S4-NN-FW support?
A: The HCS01.1E-W0013-A-02-B-ET-EC-CN-S4-NN-FW operates with a mains voltage of 3 x AC 110...230 V ±10%.
Q: What is the IP rating of the HCS01.1E-W0013-A-02-B-ET-EC-CN-S4-NN-FW drive controller?
A: This model is rated IP20, providing limited protection against dust and no protection against water.
