HCS01.1E-W0013-A-02-A-ET-EC-NN-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911375132
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0013-A-02-A-ET-EC-NN-NN-NN-FW is part of the HCS IndraDrive Controllers series and has a MultiEthernet communication interface. This drive controller features a device peak current of 13 Amps and is cooled by an internal blower. It uses an IP20 enclosure rating and supports IndraDyn Hiperface and EnDat 2.1/2.2 encoder interfaces.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0013-A-02-A-ET-EC-NN-NN-NN-FW is a drive controller produced by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. It conditions three-phase mains power, modulates output current, and exchanges status data so that connected servo axes follow commanded motion profiles in automated equipment such as pick-and-place stations, conveyors, or packaging units. Its role is to provide the electrical and communication link between the incoming supply, the motor feedback system, and the higher-level machine control. This operating approach supports precise speed, torque, and position regulation during repeated machine cycles.
This controller accepts a supply range of 3 x AC 110...230 V ±10%, which matches low-voltage industrial grids while allowing tolerance for normal line fluctuations. The housing carries an IP20 rating, so it must be mounted inside a protected cabinet to prevent accidental contact with internal parts. Motor windings can receive up to 13 A of peak current, enabling short acceleration bursts without exceeding the power section limits. Network traffic is handled through MultiEthernet, and the port supports PROFINET, EtherNet/IP, EtherCAT, and SERCOS III protocols. That flexibility lets the controller operate in several common industrial network environments without changing the base unit. Rotor feedback arrives on Interface 1, which supports IndraDyn Hiperface and EnDat 2.1/2.2 encoder feedback for closed-loop position control. This allows the drive to process accurate motor position signals during servo operation. Interface 2 has no installed hardware, and the safety interface slot is also blank, so external safety hardware must handle emergency-stop functions.
The unit is Design Version 1, indicating the first mechanical release of this HCS01 configuration. Heat is removed by internal air cooling; an integrated blower moves cabinet air across the heat sink and eliminates the need for external ducts. The power circuit supports infeeding and fed operation, so it can supply and absorb DC-bus energy during regenerative braking events. This power section is delivered for a BASIC control section, which provides standard motion functions for the connected axis.
Frequently Asked Questions about HCS01.1E-W0013-A-02-A-ET-EC-NN-NN-NN-FW:
Q: What communication interface does the HCS01.1E-W0013-A-02-A-ET-EC-NN-NN-NN-FW controller support?
A: The HCS01.1E-W0013-A-02-A-ET-EC-NN-NN-NN-FW supports MultiEthernet for versatile communication capabilities.
Q: What cooling method is used by the HCS01.1E-W0013-A-02-A-ET-EC-NN-NN-NN-FW drive controller?
A: This drive controller features internal air cooling utilizing an integrated blower for thermal management.
Q: What is the peak current rating of the HCS01.1E-W0013-A-02-A-ET-EC-NN-NN-NN-FW controller?
A: The device can handle a peak current of up to 13 A during operation.
Q: What is the supported mains voltage range for the HCS01.1E-W0013-A-02-A-ET-EC-NN-NN-NN-FW?
A: This model is designed for systems using a three-phase AC mains voltage supply of 110 to 230 V with a 10% tolerance.
Q: What is the IP rating of the HCS01.1E-W0013-A-02-A-ET-EC-NN-NN-NN-FW device?
A: The HCS01.1E-W0013-A-02-A-ET-EC-NN-NN-NN-FW drive controller has an IP20 rating for protection against solid objects.
