HCS01.1E-W0013-A-02-A-CC-EC-PB-L3-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911337833
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0013-A-02-A-CC-EC-PB-L3-NN-FW is a drive controller in the HCS IndraDrive Controllers series. It features a 13 Amp peak current and an internal air cooling method through an integrated blower. This controller has SERCOS III master communication, PROFIBUS interface, and supports encoder interfaces such as IndraDyn Hiperface and EnDat 2.1/2.2.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0013-A-02-A-CC-EC-PB-L3-NN-FW is a drive controller produced by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. Classified as an HCS Drive Controller in the HCS01 line, it converts motion commands into regulated three-phase power for servo and induction motors. In this role, it acts as the power and regulation stage between the supply network, the higher-level motion controller, and the connected motor. By adjusting output current and voltage in real time, the unit supports repeatable motion in packaging, handling, and general production equipment. This allows machine axes to maintain coordinated speed, torque, and position control across multi-axis systems.
Electrical capacity is set by a device peak current of 13 A, giving the unit headroom during acceleration and changing loads. It operates from a three-phase supply of 3 × AC 110–230 V ±10%, matching common factory distribution panels without requiring a step-down transformer. Heat from the power stage is removed by internal air cooling that uses an integrated blower, so no external ducting is required. The housing has an IP20 rating, which means the controller is intended for cabinet installation while remaining accessible for wiring. For personnel protection, the controller integrates STO, which disables motor torque through solid-state paths. This safety function helps the drive fit applications that require controlled removal of torque without adding separate safety contactors.
Axis coordination is handled by a SERCOS III master interface that supports real-time synchronization and cross-communication with neighboring drives. The control section uses the ADVANCED type, designated A, and it is matched to this power module. Motor feedback is accepted through IndraDyn Hiperface or EnDat 2.1/2.2 channels, while machine-level commands can also be exchanged over a PROFIBUS port. The internal DC bus supports energy exchange with other connected IndraDrive units, which helps distribute regenerated and consumed power across the system. Feedback and fieldbus connections allow the controller to respond to both motion commands and actual motor position during operation. The product is Design Version 1, and no additional design features are declared.
Frequently Asked Questions about HCS01.1E-W0013-A-02-A-CC-EC-PB-L3-NN-FW:
Q: What is the peak current capability of the HCS01.1E-W0013-A-02-A-CC-EC-PB-L3-NN-FW controller?
A: The HCS01.1E-W0013-A-02-A-CC-EC-PB-L3-NN-FW can deliver a peak current of 13 A for the connected motor or load.
Q: What type of communication interface does the HCS01.1E-W0013-A-02-A-CC-EC-PB-L3-NN-FW provide?
A: This controller is equipped with a SERCOS III master communication interface that supports cross communication.
Q: How is the HCS01.1E-W0013-A-02-A-CC-EC-PB-L3-NN-FW cooled?
A: An internal blower enables air cooling inside the HCS01.1E-W0013-A-02-A-CC-EC-PB-L3-NN-FW for temperature management.
Q: Which safety feature is available on the HCS01.1E-W0013-A-02-A-CC-EC-PB-L3-NN-FW controller?
A: The safety interface on this controller is STO (Safe Torque Off), helping prevent accidental motor movement.
Q: What mains voltage does the HCS01.1E-W0013-A-02-A-CC-EC-PB-L3-NN-FW support?
A: This unit operates with a mains voltage supply of 3 x AC 110 to 230 V with a ±10% tolerance.
