HCS01.1E-W0013-A-02-A-CC-EC-ET-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911334779
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0013-A-02-A-CC-EC-ET-NN-NN-FW is a HCS IndraDrive Controller equipped with a MultiEthernet interface and SERCOS III master communication. This ADVANCED control section design uses air cooling via an internal integrated blower and has a peak current rating of 13 Amps. It supports encoder interfaces such as IndraDyn Hiperface and EnDat 2.1/2.2, and operates at three-phase AC 110 to 230 Volts with IP20 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat manufactures the HCS01.1E-W0013-A-02-A-CC-EC-ET-NN-NN-FW drive controller for the HCS IndraDrive Controllers series. The unit belongs to the compact HCS01 line and serves as a single-axis power stage that links servo motors to higher-level motion systems in packaging, printing, and handling equipment. It integrates the power section and a plug-in control module, so one enclosure can handle torque, velocity, and positioning commands. Its role is to regulate motor power in response to motion commands from the machine control.
The installed control section is classified as ADVANCED and is paired with this power stage, providing extended motion functions and local PLC processing without external hardware. Real-time command exchange occurs through the SERCOS III master (cross communication) channel, which allows multiple drives to synchronize within microseconds. Motor feedback reaches the controller through the Encoder IndraDyn Hiperface/EnDat 2.1/2.2 interface, supporting absolute position data for precise loop closure. Thermal energy is removed by internal air cooling through an integrated blower, which circulates cabinet air across the heat sink without additional ducting. During acceleration or brief overloads, the power stage can deliver up to 13 A of peak current to the connected axis. The hardware uses design version 1 and does not include a safety interface.
Power is supplied from a three-phase network rated at 3 x AC 110...230 V ±10%, matching common low-voltage control cabinets. The rectifier and DC bus are arranged for infeeding and fed operation, so regenerated energy can be returned to the mains or shared with other axes. Fieldbus flexibility comes from the integrated MultiEthernet port, which may be configured for PROFINET, EtherNet/IP, or EtherCAT. This allows the same drive platform to connect to different Ethernet-based control networks. The IP20 enclosure classification limits installation to protected control panels. Firmware is ordered as a separate sub-position, and no additional design features are listed.
Frequently Asked Questions about HCS01.1E-W0013-A-02-A-CC-EC-ET-NN-NN-FW:
Q: Which communication interface is supported on the HCS01.1E-W0013-A-02-A-CC-EC-ET-NN-NN-FW controller?
A: The HCS01.1E-W0013-A-02-A-CC-EC-ET-NN-NN-FW supports SERCOS III master cross communication for advanced network integration.
Q: What type of cooling method does the HCS01.1E-W0013-A-02-A-CC-EC-ET-NN-NN-FW controller use?
A: The cooling method is air cooling through an integrated blower within the device.
Q: What is the device peak current for the HCS01.1E-W0013-A-02-A-CC-EC-ET-NN-NN-FW?
A: This drive controller has a peak current capacity of 13 A.
Q: What mains voltage does the HCS01.1E-W0013-A-02-A-CC-EC-ET-NN-NN-FW operate on?
A: The mains voltage range for this controller is three-phase AC 110 to 230 V ±10%.
Q: What is the IP rating of the HCS01.1E-W0013-A-02-A-CC-EC-ET-NN-NN-FW?
A: The IP rating for this model is IP20, offering basic protection against solid objects.
