HCS01.1E-W0013-A-02-A-CC-EC-ET-L3-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911336835
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0013-A-02-A-CC-EC-ET-L3-NN-FW is a drive controller in the HCS IndraDrive Controllers series. It features SERCOS III master communication, MultiEthernet, and supports encoder interfaces such as IndraDyn Hiperface and EnDat 2.1/2.2. This ADVANCED control section design supports a mains voltage of 3 x AC 110 to 230 V and delivers a peak current of 13 Amps.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0013-A-02-A-CC-EC-ET-L3-NN-FW is manufactured by Bosch Rexroth Indramat as part of the HCS IndraDrive Controllers series. Serving as an HCS drive controller, it supplies regulated power to connected servo axes and executes motion commands issued over the plant network. The module uses the HCS01 line architecture and design version 1, placing it in the compact single-axis category used in packaging machines, handling stations, and general factory automation. Its cabinet-mounted format combines power conversion and axis control in one unit. This type of controller is suited to applications that need accurate speed and position regulation while keeping panel space low.
This controller operates from a three-phase mains of 3 x AC 110 to 230 V ±10%, allowing low-voltage installations without an autotransformer. Peak output current reaches 13 A, giving the drive short-term headroom during acceleration and other brief load changes. That margin helps the axis respond to dynamic demand without requiring a larger continuous power stage. Thermal management relies on internal air cooling with an integrated blower, so cabinet air is pulled through the heatsink and no external ducting is required. For real-time axis coordination, cross-communication is handled with a SERCOS III master interface, enabling deterministic data exchange between multiple drives. The enclosure has an IP20 rating, which provides finger-safe terminals and requires installation in a closed control cabinet.
The control section installed in this model is the ADVANCED version, matched to the delivered power section. Feedback from motors is accepted through the IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface, so the drive can process position information needed for closed-loop motion control. Higher-level controllers can access diagnostic and cyclic data through the integrated MultiEthernet channel, which supports several Ethernet-based fieldbus options. Functional safety is provided by STO (Safe Torque Off), which removes gate drive energy to the output stage without requiring contactors. The communication and feedback arrangement allows the drive to exchange command, status, and encoder data with the surrounding motion system.
Frequently Asked Questions about HCS01.1E-W0013-A-02-A-CC-EC-ET-L3-NN-FW:
Q: What communication interface does the HCS01.1E-W0013-A-02-A-CC-EC-ET-L3-NN-FW use?
A: The HCS01.1E-W0013-A-02-A-CC-EC-ET-L3-NN-FW supports SERCOS III master cross communication for reliable network integration.
Q: How is the HCS01.1E-W0013-A-02-A-CC-EC-ET-L3-NN-FW cooled?
A: The device is internally air cooled using an integrated blower.
Q: What is the peak current supported by the HCS01.1E-W0013-A-02-A-CC-EC-ET-L3-NN-FW?
A: This controller has a peak current rating of 13 A.
Q: What is the mains voltage specification for the HCS01.1E-W0013-A-02-A-CC-EC-ET-L3-NN-FW?
A: The input voltage range for this model is 3-phase AC 110 to 230 V with a ±10% tolerance.
Q: What type of safety interface is included with this drive controller?
A: The safety interface provided is STO, which stands for Safe Torque Off.
