HCS01.1E-W0013-A-02-A-CC-EC-EC-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911343619
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0013-A-02-A-CC-EC-EC-NN-NN-FW is an HCS Drive Controller from the HCS IndraDrive Controllers series. It features a SERCOS III master communication interface and supports two encoder interfaces, IndraDyn Hiperface and EnDat 2.1/2.2. The controller has an internal air cooling method through an integrated blower and provides a device peak current of 13 Amps.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0013-A-02-A-CC-EC-EC-NN-NN-FW is a drive controller manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. Designed for cabinet installation, the unit supplies regulated power and coordinated motion commands to servo axes used in material-handling lines, packaging equipment, and general factory automation. It combines power electronics with communication and feedback interfaces so the controller serves as the direct link between PLC motion requests and motor response. Its integrated layout also supports compact control cabinets where separate motion modules would take more space.
Electrically, the controller accepts a three-phase input of 3 × AC 110–230 V ±10%, allowing direct connection to common factory mains. It can source up to 13 A of peak current for short-term motor demands, which supports brief acceleration and changing load conditions. Axis data are exchanged through a SERCOS III master channel that permits cross-communication among drives in the same system. Thermal losses are removed by internal air cooling via an integrated blower, and the IP20 enclosure is finger-safe but still requires installation inside a protective cabinet.
The drive is equipped with the ADVANCED control section, providing expanded processing capacity for complex motion sequences. Encoder feedback is handled by a primary port that supports IndraDyn Hiperface/EnDat 2.1/2.2, and a second identical port is available for an additional feedback connection. This arrangement supports applications that need motor feedback and a second encoder channel within the same controller platform. Energy exchange follows infeeding and fed operation, enabling standard DC-bus supply and braking-energy recovery. The unit is not equipped with a safety interface, so external circuitry must handle emergency-stop functions.
Frequently Asked Questions about HCS01.1E-W0013-A-02-A-CC-EC-EC-NN-NN-FW:
Q: What cooling method does the HCS01.1E-W0013-A-02-A-CC-EC-EC-NN-NN-FW drive controller use?
A: This model uses internal air cooling via an integrated blower for temperature management.
Q: What is the device peak current for the HCS01.1E-W0013-A-02-A-CC-EC-EC-NN-NN-FW?
A: The HCS01.1E-W0013-A-02-A-CC-EC-EC-NN-NN-FW supports a peak current of 13 A.
Q: What communication interface is available on the HCS01.1E-W0013-A-02-A-CC-EC-EC-NN-NN-FW?
A: This controller features a SERCOS III master communication interface for cross communication.
Q: What mains voltage range is supported by the HCS01.1E-W0013-A-02-A-CC-EC-EC-NN-NN-FW?
A: The supported mains voltage for this drive controller is 3 x AC 110 to 230 V ±10%.
Q: What encoder interfaces are provided on the HCS01.1E-W0013-A-02-A-CC-EC-EC-NN-NN-FW controller?
A: Both interface 1 and 2 support encoder connections for IndraDyn Hiperface and EnDat 2.1/2.2.
