HCS01.1E-W0009-A-02-E-S3-EC-NN-L4-AA-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911333493
Ask for AvailabilityThe Bosch Rexroth Indramat HCS01.1E-W0009-A-02-E-S3-EC-NN-L4-AA-FW is a drive controller from the HCS IndraDrive Controllers series. It features a SERCOS III communication interface, device peak current of 9 A, and supports mains voltages from 110 to 230 V AC. The controller offers STO and SBC safety interfaces and uses internal air cooling through an integrated blower, with an IP20 rating.
Internal Product Review
The HCS01.1E-W0009-A-02-E-S3-EC-NN-L4-AA-FW is an HCS drive controller configured with SERCOS III communication and an ECONOMY control section. Internal blower cooling and 9 A peak current give the unit solid thermal behavior and capable dynamic response. STO and SBC safety functions are a strong advantage for machine integration.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0009-A-02-E-S3-EC-NN-L4-AA-FW is a drive controller produced by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. It belongs to the HCS01 line and is supplied as design version 1. The unit converts incoming three-phase supply power into regulated motor current for servo axes in industrial automation cells, conveyors, and handling systems. It is intended for compact motion applications where the drive must support coordinated speed, torque, and position control within a machine system.
The controller accepts a mains window of 3 × AC 110–230 V ±10% and can deliver up to 9 A of peak output, allowing it to operate small to medium IndraDyn motors. This voltage range supports use on low-voltage three-phase supplies commonly found in compact industrial equipment. Command and diagnostic data move over SERCOS III, while the installed control section follows the ECONOMY profile for standard motion tasks. Thermal energy is removed by internal air cooling through an integrated blower. The power section is arranged so regenerated braking energy can be returned to the DC link during deceleration when compatible system components are used.
For cabinet integration, the housing carries an IP20 ingress rating, so it must be mounted in an enclosed panel rather than in an open machine area. Motion stop and brake release functions are handled through the dual-channel safety inputs STO and SBC, supporting torque shutdown and controlled brake actuation. High-resolution position data reach the drive through the multifunction encoder port that supports Encoder IndraDyn Hiperface/EnDat 2.1/2.2. Support for these feedback formats allows the controller to work with multiple compatible motor encoder systems. A second feedback socket is left vacant, which allows operation without a redundant sensor channel when the application does not require one.
