HCS01.1E-W0009-A-02-E-S3-EC-NN-L3-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911337327
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0009-A-02-E-S3-EC-NN-L3-NN-FW is part of the HCS IndraDrive Controllers series and is designed as an ECONOMY type drive controller. It features a SERCOS III communication interface, supports mains voltages of 3 x AC 110 to 230 V±10%, and provides a device peak current of 9 Amps. The controller uses air cooling through an integrated blower and has an IP20 rating with an STO safety interface.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0009-A-02-E-S3-EC-NN-L3-NN-FW is a drive controller manufactured by Bosch Rexroth Indramat and supplied in the HCS IndraDrive Controllers series. The unit forms the power and control interface between the mains and an IndraDyn synchronous motor, executing speed and position loops in automated handling, packaging, and assembly stations that require coordinated axis motion. Its place in the compact HCS01 line makes it suitable for multi-axis systems where panel space is limited and several drive modules must fit within one cabinet.
The controller communicates over SERCOS III, enabling deterministic real-time exchange with higher-level PLCs. Its control section bears the ECONOMY designation, indicating a streamlined variant that omits diagnostic extensions while still delivering full motion functionality. Internal cooling is handled by internal air cooling through an integrated blower, eliminating the need for external ductwork. The power stage provides a device peak current of 9 A, allowing short acceleration bursts without overheating. Supply compatibility spans 3 x AC 110...230 V ±10%, so the same hardware can operate on a range of low-voltage mains systems. The controller accepts position data through IndraDyn Hiperface/EnDat 2.1/2.2 encoder feedback, supporting high-resolution absolute and incremental signals for precise servo regulation.
The cabinet-mounted housing carries an IP20 ingress rating, so the terminals are finger-safe but the unit still requires installation inside an enclosure. Functional safety is implemented with STO (Safe Torque Off), which removes gate-drive power to the IGBTs for a compliant shutdown. The unit uses common DC link infeed, allowing several axes to share one supply module. The hardware is release 1 of the A-02 design, and Interface 2 remains unpopulated to simplify wiring. No additional mechanical or electronic options are fitted on this variant.
Frequently Asked Questions about HCS01.1E-W0009-A-02-E-S3-EC-NN-L3-NN-FW:
Q: What communication interface is available on the HCS01.1E-W0009-A-02-E-S3-EC-NN-L3-NN-FW controller?
A: This model supports SERCOS III as its primary communication interface.
Q: How is the HCS01.1E-W0009-A-02-E-S3-EC-NN-L3-NN-FW drive controller cooled?
A: The drive controller uses an internal air cooling system with an integrated blower.
Q: What encoder interfaces are available on the HCS01.1E-W0009-A-02-E-S3-EC-NN-L3-NN-FW controller?
A: It supports encoder interfaces including IndraDyn Hiperface and EnDat 2.1/2.2 for feedback input.
Q: What mains voltage range does the HCS01.1E-W0009-A-02-E-S3-EC-NN-L3-NN-FW drive controller support?
A: The HCS01.1E-W0009-A-02-E-S3-EC-NN-L3-NN-FW model can operate at mains voltages of 3 x AC 110 to 230 V ±10%.
Q: What is the IP rating of the HCS01.1E-W0009-A-02-E-S3-EC-NN-L3-NN-FW drive controller?
A: This controller features an IP20 rating, offering basic protection against solid objects but no water protection.
