Product Description:

The HCS01.1E-W0009-A-02-E-S3-EC-EP-NN-NN-FW belongs to the HCS IndraDrive Controllers series manufactured by Bosch Rexroth Indramat. As a compact drive controller, it links the power section of a machine with higher-level PLCs and manages motor torque, speed, and position in automated packaging, handling, and assembly lines. Within a multi-axis platform, it provides the motion-control layer that translates digital commands into real-time current and voltage regulation for connected servomotors.

The unit communicates over SERCOS III, enabling synchronized cycle times for deterministic motion tasks. Thermal management is handled by internal air cooling, and an integrated blower moves air through the heat sink so no external ducting is required. For short accelerations, it can supply up to 9 A of peak current, which sets the maximum motor load during rapid indexing or braking events. The housing is rated IP20, so the controller is intended for installation in control cabinets with protective covers while still allowing simple plug-in wiring and easy access for service.

The power stage accepts three-phase input across 110–230 V AC ±10%, making the controller suitable for low-voltage factory grids and standby generators. The control section is the ECONOMY variant, and pairing notes indicate that only this section type can be mounted on the selected power module. Feedback is processed through the multifunction encoder interface supporting Hiperface/EnDat 2.1/2.2, allowing absolute position data without additional converter boards. The product is Version 1. The integrated power supply operates in infeeding/feeder mode, so excess regenerative energy can be shared among drives or returned to the mains bus. The unit does not include a safety interface, so external STO relays must be provided when required.