HCS01.1E-W0009-A-02-B-ET-EC-PB-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911328450
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0009-A-02-B-ET-EC-PB-NN-NN-FW is an HCS Drive Controller in the HCS IndraDrive Controllers series. It features MultiEthernet and PROFIBUS communication interfaces, with a device peak current of 9 A. This controller provides air cooling through an integrated blower and has an IP20 rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0009-A-02-B-ET-EC-PB-NN-NN-FW is produced by Bosch Rexroth Indramat as part of the HCS IndraDrive Controllers series. Within the HCS01 line, the unit provides closed-loop power conversion for servo and induction motors used in automated assembly cells, packaging lines, and material-handling stations. Integrated control and power electronics translate fieldbus commands into regulated current for a single axis while fitting narrow 45 mm cabinet slots without external power modules. This helps compact machines use precise motion control without a large drive footprint.
Its control section is the BASIC variant, and host communication is handled through a MultiEthernet port that supports several real-time Ethernet protocols. Rotor position feedback reaches the drive over the Encoder IndraDyn Hiperface/EnDat 2.1/2.2 channel, allowing high-resolution sinusoidal encoders to connect directly. Thermal management relies on internal air cooling, and an integrated blower pushes cabinet air across the heat sink so no separate ductwork is needed. The inverter can supply a device peak current of 9 A, which supports short-term current demand during acceleration. The unit is design version 1 and uses the matching control section for this configuration.
A second fieldbus port provides PROFIBUS connectivity for controllers that need cyclic I/O without Ethernet infrastructure. This allows the drive to work in installations that combine newer network architectures with older control systems. The housing carries an IP20 rating and therefore must be mounted inside a protected electrical enclosure. Input power is drawn from a 3-phase 110–230 V AC ±10% mains supply, and the DC link uses an infeeding and fed arrangement that permits energy sharing among multiple drives on the same bus. Because no safety interface is fitted, external relays handle emergency-stop functions.
Frequently Asked Questions about HCS01.1E-W0009-A-02-B-ET-EC-PB-NN-NN-FW:
Q: Which communication interface is offered on the HCS01.1E-W0009-A-02-B-ET-EC-PB-NN-NN-FW drive controller?
A: This unit utilizes a MultiEthernet communication interface for flexible network integration.
Q: What mains voltage range is supported by the HCS01.1E-W0009-A-02-B-ET-EC-PB-NN-NN-FW?
A: The HCS01.1E-W0009-A-02-B-ET-EC-PB-NN-NN-FW can handle mains voltage between 3 x AC 110 and 230 V, with a ±10% tolerance.
Q: What cooling method is used in the HCS01.1E-W0009-A-02-B-ET-EC-PB-NN-NN-FW controller?
A: This model includes built-in air cooling via an integrated blower for internal heat dissipation.
Q: What is the maximum peak current for the HCS01.1E-W0009-A-02-B-ET-EC-PB-NN-NN-FW?
A: The device supports a peak current of 9 A for its drive operation.
Q: What is the IP rating of the HCS01.1E-W0009-A-02-B-ET-EC-PB-NN-NN-FW drive controller?
A: This controller features an IP20 rating, indicating protection against solid foreign objects greater than 12.5 mm.
