Product Description:

The HCS01.1E-W0009-A-02-B-ET-EC-EC-S5-NN-FW is a drive controller manufactured by Bosch Rexroth Indramat. It belongs to the HCS IndraDrive Controllers series. This compact unit controls servo or asynchronous motors in small-to-medium automation axes, providing regulated power conversion and closed-loop motion control in distributed machine platforms. In operation, it converts incoming electrical power into controlled motor current and processes feedback signals so speed, torque, and position remain stable during machine movement.

The drive communicates with higher-level PLCs through a MultiEthernet port that accepts common industrial Ethernet protocols without additional hardware. This supports use with common PLC network architectures. During dynamic loading, it can deliver up to 9 A of peak output current, allowing brief acceleration and deceleration surges beyond continuous demand. Its input range of 3 x AC 110…230 V ±10% lets the same hardware operate on common low-voltage mains. The housing is rated IP20, so installation inside a control cabinet is required. Internal thermal management uses internal air cooling through an integrated blower, which moves cabinet air across the heat-sink fins without external ducting. Motor feedback is read through a dual-port IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface, allowing compatible feedback devices to connect directly to the controller.

The control section uses the BASIC hardware layer, which matches this power stage with standard logic functions. The unit is version 1, identifying the revision used for this controller. It also uses an infeeding and fed power supply configuration that supports shared DC-bus operation between several drives. This arrangement allows connected axes to exchange energy on a common bus during operation. Software is ordered separately from the hardware, and the unit remains focused on core drive control and motor feedback handling.