Product Description:

The HCS01.1E-W0009-A-02-B-ET-EC-EC-NN-NN-FW is a compact drive controller in the HCS IndraDrive Controllers series. As a modular unit, it manages power conversion and motion control for servo and induction motors used in conveyors, packaging equipment, and pick-and-place systems. It belongs to the HCS01 line for low-power axes in multi-axis automation platforms. By combining the power section and control section in one housing, the controller supports closed-loop speed and position control while keeping the drive package compact. This format is useful where a single housing must handle both the power electronics and the motion-control interface for a small axis.

The power input accepts 3 x AC 110...230 V ±10% from a three-phase supply. Its output stage can reach a peak current of 9 A, which supports short acceleration demands for smaller motors. Because the input range spans lower and higher industrial voltages, the drive can be integrated into different plant power systems without a separate isolation transformer. Heat is removed by internal air cooling with an integrated blower, and the enclosure has an IP20 rating for protection against finger contact and settled dust. Control and diagnostic traffic runs through MultiEthernet, so the same port can be used with EtherNet/IP, PROFINET, or EtherCAT depending on the machine network.

The controller uses a BASIC control section that mounts directly to the power section. Both motor-feedback connections support IndraDyn Hiperface/EnDat 2.1/2.2 encoder signals, allowing the drive to process absolute position data from compatible motors. The unit uses an Infeeding / Feeded supply concept, so it can exchange energy through a common DC bus with other axes in the system. This arrangement supports compact multi-axis layouts where braking energy from one drive can be used elsewhere on the bus. The feedback arrangement also gives the controller flexibility when it is paired with different motor families on the same machine.