Product Description:

The HCS01.1E-W0009-A-02-B-ET-EC-CN-NN-NN-FW is a compact drive controller produced by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It serves as the power and regulation stage between the industrial supply and compatible synchronous or induction motors on automated machinery. The controller manages speed, torque, and positioning commands within closed motion loops. By converting incoming electrical power into controlled motor current, it supports repeatable axis movement during indexing, conveying, and positioning tasks. Its compact format suits installations where cabinet space is limited but closed-loop motor control is still required.

The enclosure has an IP20 rating, so the unit must be installed inside a cabinet that protects it from dust and accidental contact. The power section accepts 3 x AC 110 to 230 V ±10%, which allows use on compatible low-voltage plant supplies. During acceleration or short transient loads, the inverter can deliver up to 9 A of peak current to the motor windings. Fieldbus communication is handled by a built-in MultiEthernet port for real-time Ethernet protocols. The first encoder channel accepts IndraDyn Hiperface or EnDat 2.1/2.2 encoder signals, allowing high-resolution motor feedback to be processed directly by the control loop.

A separate CANopen channel allows the controller to exchange data on legacy motion networks when required. Motion functions are handled by the BASIC control section, which supports general-purpose positioning and velocity control without optional safety expansion. Thermal management uses internal air cooling through an integrated blower, so heat is discharged upward through the chassis. This airflow pattern requires a cabinet layout that leaves a clear path for warm air to rise away from the housing. The shared DC bus operates with infeeding and regeneration, allowing multiple compatible axes to use a common rectifier and return braking energy to the supply during deceleration.