HCS01.1E-W0009-A-02-B-ET-EC-CN-L3-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911342335
Ask for AvailabilityThe Bosch Rexroth Indramat HCS01.1E-W0009-A-02-B-ET-EC-CN-L3-NN-FW is an HCS Drive Controller from the HCS IndraDrive Controllers series. It features a MultiEthernet communication interface, CANopen support, and encoder interfaces for IndraDyn Hiperface and EnDat 2.1/2.2. The controller has a peak current of 9 Amps, operates on 3-phase AC voltage from 110 to 230 Volts, and uses internal air cooling through an integrated blower.
Internal Product Review
The HCS01.1E-W0009-A-02-B-ET-EC-CN-L3-NN-FW is an HCS drive controller configured with MultiEthernet communication and CANopen support. Operation on 3 x AC 110...230 V ±10% and a 9 A peak current make the unit a strong fit for responsive IndraDrive applications.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0009-A-02-B-ET-EC-CN-L3-NN-FW is a drive controller manufactured by Bosch Rexroth Indramat and assigned to the HCS IndraDrive Controllers series. In an automation cell, this compact unit converts incoming three-phase power into controlled output for servo axes. It supervises torque and speed for packaging, handling, and processing equipment while supporting coordinated motion through its integrated control interfaces. This arrangement allows the drive to regulate motor behavior closely during starts, stops, and speed changes.
The controller communicates with higher-level PLCs over MultiEthernet, allowing access through PROFINET, EtherNet/IP, or EtherCAT without separate option cards. For servo feedback, it provides an IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface that supplies position data to the internal control loops. A second interface supports CANopen communication for decentralized I/O or axis synchronization. Integrated safety is provided through STO (Safe Torque Off), which removes motor-energizing pulses when the safety input is activated. During dynamic operation, the power module can deliver up to 9 A of peak current for short acceleration demands within its thermal capacity. That combination supports both real-time motion control and integration with peripheral devices on the same machine.
The attached control section is the BASIC variant and is matched to the power stage for this controller version. It operates from a three-phase supply of 3 x AC 110…230 V ±10% and is categorized for infeeding or feeder operation, so regeneration and DC-bus sharing can be handled through external cabinet modules. Heat is removed by internal air cooling through an integrated blower, which moves air across the heat sink without requiring an external fan assembly. The housing has an IP20 rating and is intended for installation in a closed enclosure to protect it from conductive dust. The enclosure design relies on cabinet-level protection rather than open installation on the machine frame.
