HCS01.1E-W0009-A-02-A-CC-EC-NN-S5-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911378529
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0009-A-02-A-CC-EC-NN-S5-NN-FW is a drive controller from the HCS IndraDrive Controllers series. It features an IP20 rating, device peak current of 9 Amps, and supports SERCOS III master communication. The controller uses air cooling with an integrated blower and operates on 3 x AC 110 to 230 Volt mains voltage.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0009-A-02-A-CC-EC-NN-S5-NN-FW is a drive controller manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It converts line power into regulated, pulse-width-modulated output. The controller exchanges motion commands with higher-level PLCs, allowing precise speed and torque control for servo axes in packaging lines, material-handling stations, and similar automation cells.
The integrated communication interface is a SERCOS III master with cross communication, so cyclic setpoints and feedback are exchanged over a deterministic fiber-optic ring without additional fieldbus hardware. For command processing, the controller uses the ADVANCED control section, adding extended motion functions such as real-time cross communication between axes. Thermal management relies on internal air cooling through an integrated blower; the blower pulls cabinet air through the heat sink to maintain rated current without external ducting. The power stage can supply up to 9 A of peak current, allowing short-term current demand during acceleration. A cabinet protection rating of IP20 indicates finger-safe touch protection but no protection against liquids, so installation inside a closed electrical enclosure is required.
An encoder feedback socket that accepts IndraDyn Hiperface or EnDat 2.1/2.2 encoder feedback enables absolute position evaluation without additional adapter modules. The mains input range of 3 x AC 110 to 230 V ±10% allows the unit to operate on single- or three-phase plant supplies. Its DC link uses an infeeding and fed power supply topology, so the controller can share regenerated energy with other axes on the same bus. This supports shared bus operation in multi-axis systems. The controller is version 1 within the HCS01 line, and interface 2 is blank because no secondary feedback channel is equipped.
Frequently Asked Questions about HCS01.1E-W0009-A-02-A-CC-EC-NN-S5-NN-FW:
Q: What communication interface is included with the HCS01.1E-W0009-A-02-A-CC-EC-NN-S5-NN-FW drive controller?
A: The HCS01.1E-W0009-A-02-A-CC-EC-NN-S5-NN-FW controller supports SERCOS III master cross communication.
Q: How is the HCS01.1E-W0009-A-02-A-CC-EC-NN-S5-NN-FW controller cooled?
A: This model uses an internal air cooling system with an integrated blower.
Q: What is the peak current capability of the HCS01.1E-W0009-A-02-A-CC-EC-NN-S5-NN-FW?
A: The device has a peak current rating of 9 A for demanding applications.
Q: What is the input mains voltage range supported by this drive controller?
A: The HCS01.1E-W0009-A-02-A-CC-EC-NN-S5-NN-FW controller operates at a mains voltage of 3 x AC 110...230 V ±10%.
Q: What level of ingress protection does the HCS01.1E-W0009-A-02-A-CC-EC-NN-S5-NN-FW provide?
A: It is designed with an IP20 rating, offering protection against solid objects larger than 12 mm.
