Product Description:

The HCS01.1E-W0009-A-02-A-CC-EC-EM-NN-NN-FW is a drive controller produced by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It conditions three-phase supply power and issues closed-loop torque, speed, or position commands to servo motors. This makes it suitable for automated handling, packaging, and machine-tool systems where coordinated multi-axis motion is required. Its role is to regulate motor response in real time so the connected axis can follow programmed motion profiles with stable speed and positioning behavior.

The HCS01 platform operates on 3 x AC 110 to 230 V ±10%, allowing connection in low-voltage regions. In this variant, the power electronics can deliver a peak current of 9 A, which supports short acceleration demands. Thermal energy is removed by internal air cooling through an integrated blower, so no external fan assembly is required. Command and diagnostic data travel over a SERCOS III master with cross communication link for deterministic data exchange among drives. That network arrangement supports synchronized coordination between axes during complex motion sequences. Control functions run on the ADVANCED section for the drive's motion and diagnostic tasks.

Feedback connectivity is handled by two ports. Interface 1 accepts IndraDyn Hiperface and EnDat 2.1/2.2 encoders for position feedback, while Interface 2 provides encoder emulation for systems that need a reproduced position signal. This arrangement lets the controller process modern absolute feedback while still providing a compatible output for external equipment. The enclosure has an IP20 rating, so the unit is intended for installation in a closed cabinet. DC power is supplied over a DC bus infeed and feed-through connection that can return excess braking energy to the supply rail. A dedicated safety interface is not included, so external safety devices must interrupt the mains when required.