HCS01.1E-W0009-A-02-A-CC-EC-EC-L3-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911345872
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0009-A-02-A-CC-EC-EC-L3-NN-FW is an HCS Drive Controller in the HCS IndraDrive Controllers series. It uses an internal air cooling method with an integrated blower and supports a peak current of 9 Amps. This controller features SERCOS III cross communication and dual encoder interfaces for IndraDyn Hiperface or EnDat 2.1/2.2, with an IP20 rating and STO safety interface.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0009-A-02-A-CC-EC-EC-L3-NN-FW is a modular drive controller in the HCS IndraDrive Controllers series manufactured by Bosch Rexroth Indramat. This unit serves as the power and control stage for single-axis servo or induction drives in industrial automation cells. By combining inverter electronics with diagnostic and safety circuitry, the controller supplies regulated current to connected motors while exchanging real-time status data with higher-level PLCs across fieldbus networks. Its compact footprint and cabinet-mounting design make it suitable for packaging machines, pick-and-place gantries, and general motion platforms that require precise torque and speed regulation.
It supports an AC input of 3 x AC 110...230 V ±10%, allowing the same hardware to operate on low- or medium-voltage plant power without tap changes. During acceleration, it can deliver a device peak current of 9 A, giving short bursts of torque to overcome static loads before returning to rated operation. Heat generated by the power stage is removed through internal air cooling that uses an integrated blower, so no external ducting is required inside the enclosure. All terminations lie behind an IP20 touch-safe shield, which limits accidental contact but requires installation in a closed cabinet. Motion commands and feedback are exchanged over SERCOS III master (cross communication), permitting deterministic axis coordination among multiple drives.
The control section identified as ADVANCED is paired with this power module and provides expanded processing for multi-axis interpolation, camming, and user macro logic. Two identical feedback ports accept Encoder IndraDyn Hiperface/EnDat 2.1/2.2 signals, enabling dual-loop control or connection of both motor and external load encoders. For functional safety, the hardware includes the STO (Safe Torque Off) circuit, which removes gate-drive energy without altering stored parameters. Energy is shared across a common DC bus, and selectable infeed/feed operation lets the unit either supply or absorb regenerative power depending on system topology. The unit is design version 1.
Frequently Asked Questions about HCS01.1E-W0009-A-02-A-CC-EC-EC-L3-NN-FW:
Q: What type of communication interface is featured in the HCS01.1E-W0009-A-02-A-CC-EC-EC-L3-NN-FW controller?
A: The HCS01.1E-W0009-A-02-A-CC-EC-EC-L3-NN-FW utilizes a SERCOS III master interface for cross communication.
Q: What is the peak current supported by the HCS01.1E-W0009-A-02-A-CC-EC-EC-L3-NN-FW?
A: This drive controller supports a device peak current of 9 A.
Q: How is the HCS01.1E-W0009-A-02-A-CC-EC-EC-L3-NN-FW cooled during operation?
A: Cooling for this model is achieved by internal air through an integrated blower.
Q: What mains voltage range does the HCS01.1E-W0009-A-02-A-CC-EC-EC-L3-NN-FW support?
A: The mains voltage for the controller is 3 x AC 110...230 V with a tolerance of ±10%.
Q: What level of protection does the HCS01.1E-W0009-A-02-A-CC-EC-EC-L3-NN-FW provide according to its IP rating?
A: The IP20 rating of this controller offers basic protection against solid objects larger than 12.5 mm but it is not protected against water.
