HCS01.1E-W0009-A-02-A-CC-EC-DA-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911347691
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0009-A-02-A-CC-EC-DA-NN-NN-FW is part of the HCS IndraDrive Controllers series. This drive controller has a device peak current of 9 Amps and uses air cooling through an integrated blower. It features a SERCOS III master communication interface and supports encoder interfaces such as IndraDyn Hiperface and EnDat 2.1/2.2.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0009-A-02-A-CC-EC-DA-NN-NN-FW is an AC drive controller manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. Within an automation cell, it acts as the command and power stage that regulates electrical energy and coordinates servo axes through profile generation and real-time communication. By combining power conversion, control functions, and network connectivity in one housing, the unit supports compact cabinet layouts for packaging machines, pick-and-place systems, and other multi-axis equipment. Its role is to translate control commands into regulated motor behavior while maintaining coordinated axis response during continuous machine operation.
The drive accepts a mains supply of 3 x AC 110...230 V ±10%, which allows operation from common low-voltage three-phase sources used in compact machinery. Heat is removed by internal air cooling through an integrated blower, so the power electronics can remain within their intended temperature range without external ducting. The controller provides a peak current capability of 9 A for short dynamic load demands, and the enclosure has an IP20 rating for installation inside a protected electrical cabinet. Network communication is handled through a SERCOS III master with cross communication interface, which supports deterministic cyclic data exchange and synchronized motion control. The communication link also allows timing-critical status data to move between connected system components during coordinated machine cycles.
The unit uses the ADVANCED control section design code, which supports expanded processing capability and diagnostic functions within the platform. Motor feedback is handled through the Encoder IndraDyn Hiperface/EnDat 2.1/2.2 interface, allowing high-resolution position tracking and compatibility with supported motor feedback systems. Power is managed through an internal supply module described as infeeding and fed, which is suited for common DC-bus arrangements in multi-axis systems. This hardware belongs to the HCS01 line series and is intended for applications that require coordinated motion in a compact drive architecture. That arrangement also allows the controller to work with servo motors that require precise electronic commutation and stable position evaluation during operation.
Frequently Asked Questions about HCS01.1E-W0009-A-02-A-CC-EC-DA-NN-NN-FW:
Q: What communication interface is available on the HCS01.1E-W0009-A-02-A-CC-EC-DA-NN-NN-FW controller?
A: The HCS01.1E-W0009-A-02-A-CC-EC-DA-NN-NN-FW supports SERCOS III master (cross communication) as its communication interface.
Q: How is the HCS01.1E-W0009-A-02-A-CC-EC-DA-NN-NN-FW cooled?
A: This drive controller is cooled by an internal integrated blower using air.
Q: What is the device peak current of the HCS01.1E-W0009-A-02-A-CC-EC-DA-NN-NN-FW?
A: The device provides a peak current of 9 A.
Q: What mains voltage does the HCS01.1E-W0009-A-02-A-CC-EC-DA-NN-NN-FW support?
A: This controller operates with a main voltage range of 3 x AC 110 to 230 V ±10%.
Q: What is the IP rating of the HCS01.1E-W0009-A-02-A-CC-EC-DA-NN-NN-FW?
A: The HCS01.1E-W0009-A-02-A-CC-EC-DA-NN-NN-FW has an IP20 rating, indicating basic protection against solid objects.
