HCS01.1E-W0008-A-03-E-S3-NN-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911328445
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0008-A-03-E-S3-NN-NN-NN-FW is an HCS Drive Controller from the HCS IndraDrive Controllers series. It features an ECONOMY control section design, a SERCOS III communication interface, and an internal air cooling system with an integrated blower. The drive controller has a peak current of 8 Amps and an IP20 protection rating, and operates at a mains voltage of 3-phase AC 200 to 500 Volts plus or minus 10 percent.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0008-A-03-E-S3-NN-NN-NN-FW is a compact drive controller manufactured by Bosch Rexroth Indramat and positioned within the HCS IndraDrive Controllers series. As a modular axis drive, it receives motion commands from higher-level control systems and converts them into regulated three-phase power for servo or induction motors, providing velocity and torque regulation in automated assembly lines, packaging machines, and material-handling stages. Optional safety and secondary communication interfaces are not installed, so the controller uses only the primary fiber loop and external safety relays as required.
For network integration, the controller offers a SERCOS III interface, allowing deterministic real-time communication with PLCs and other drives. The unit tolerates mains supplies from 3 × AC 200–500 V ±10%, so it can be installed on mixed-voltage production floors without additional transformers. When acceleration peaks demand extra current, the power section can deliver up to 8 A of device peak current before protective limiting occurs. Thermal management is handled by internal air cooling through an integrated blower, which keeps heat-sensitive IGBTs within the operating range while avoiding external ductwork. An IP20 enclosure rating indicates that the housing is finger-safe but requires installation inside a control cabinet for dust and water shielding.
The controller ships with a ECONOMY control section for standard motion axes, and it is tagged as design version 1. Its power supply mode is listed as Infeeding / Feeded, which means the unit can draw power from or return regenerated energy to a common DC bus. Inclusion in the HCS01 line means the controller uses the same footprint and mounting points as other 01 frame-size units, which helps keep cabinet layouts consistent when different current ratings are installed.
Frequently Asked Questions about HCS01.1E-W0008-A-03-E-S3-NN-NN-NN-FW:
Q: Which communication protocol is available on the HCS01.1E-W0008-A-03-E-S3-NN-NN-NN-FW drive controller?
A: This drive controller supports SERCOS III as its communication interface for seamless network integration.
Q: What control section design type does the HCS01.1E-W0008-A-03-E-S3-NN-NN-NN-FW use?
A: This model is built with an ECONOMY control section design type.
Q: What cooling method is featured on the HCS01.1E-W0008-A-03-E-S3-NN-NN-NN-FW?
A: It uses internal air cooling provided by an integrated blower for temperature management.
Q: What is the maximum peak current supported by the HCS01.1E-W0008-A-03-E-S3-NN-NN-NN-FW?
A: The device can handle a peak current of up to 8 amps.
Q: What level of environmental protection does the HCS01.1E-W0008-A-03-E-S3-NN-NN-NN-FW provide according to its IP rating?
A: This controller is rated at IP20, providing basic protection against solid foreign objects.
