HCS01.1E-W0008-A-03-E-S3-EC-NN-NN-NN-NW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911374558
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0008-A-03-E-S3-EC-NN-NN-NN-NW is part of the HCS IndraDrive Controllers series and has a peak current rating of 8 Amps. This HCS Drive Controller features SERCOS III communication, uses an internal air cooling system with an integrated blower, and has an IP20 protection rating. It operates on a mains voltage of 3-phase AC 200 to 500 Volts and is equipped with an IndraDyn Hiperface or EnDat 2.1/2.2 encoder interface.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0008-A-03-E-S3-EC-NN-NN-NN-NW is a compact drive controller developed by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. The unit coordinates power conversion and motion commands between a mains supply and an induction or synchronous servo motor in industrial automation cells. By combining power electronics with a pluggable control section, it provides a scalable axis solution for cabinet-mounted machine tools, pick-and-place stations, and general-purpose material-handling equipment. Its modular layout supports compact control cabinets and helps the drive fit a wide range of machine architectures without requiring a large installation footprint.
The power stage accepts 3 x AC 200–500 V ±10%, allowing operation across a broad range of plant voltages without a separate transformer. During load surges, the device can supply up to 8 A of peak current, which helps determine suitable upstream protection and conductor sizing. Command and diagnostic traffic is carried over SERCOS III, keeping axis data synchronized with the higher-level control system. Motor feedback is handled through support for IndraDyn Hiperface/EnDat 2.1/2.2, so compatible feedback devices can connect without additional adapters. Cooling is provided by an integrated blower, and the enclosure has an IP20 rating, which means the unit is intended for installation inside a control cabinet.
The installed control electronics are classified as ECONOMY, which suits applications that do not require a dedicated safety interface. Within the HCS01 line, the unit is assigned Design Version 1, identifying its revision level within this controller platform. The power supply arrangement is listed as infeeding or fed operation, meaning the drive can operate on a common DC bus or handle regenerated energy from connected axes. Interface 2 is not equipped, and no optional design features are fitted, which keeps the configuration straightforward for standard motion-control tasks.
Frequently Asked Questions about HCS01.1E-W0008-A-03-E-S3-EC-NN-NN-NN-NW:
Q: What is the peak current supported by the HCS01.1E-W0008-A-03-E-S3-EC-NN-NN-NN-NW?
A: This controller supports a peak current of 8 A for connected devices.
Q: Which communication interface is available on this drive controller?
A: The HCS01.1E-W0008-A-03-E-S3-EC-NN-NN-NN-NW operates with SERCOS III as its primary communication interface.
Q: How is the HCS01.1E-W0008-A-03-E-S3-EC-NN-NN-NN-NW cooled?
A: Cooling is provided via an internal air blower integrated into the unit.
Q: What is the IP rating of this Bosch Rexroth controller?
A: The controller is built to the IP20 protection rating, suitable for indoor control cabinets.
Q: What mains voltage does the HCS01.1E-W0008-A-03-E-S3-EC-NN-NN-NN-NW require for operation?
A: This model is designed for 3-phase AC mains voltage from 200 to 500 V 710%.
