HCS01.1E-W0008-A-03-E-S3-EC-NN-NN-LF-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911331725
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0008-A-03-E-S3-EC-NN-NN-LF-FW is part of the HCS IndraDrive Controllers series and is an ECONOMY type drive controller. It offers a SERCOS III communication interface and supports encoder interfaces such as IndraDyn Hiperface and EnDat 2.1/2.2. The controller uses internal air cooling through an integrated blower and has a device peak current of 8 Amps with an IP20 rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0008-A-03-E-S3-EC-NN-NN-LF-FW is a compact drive controller manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. Within an automation cell, this unit acts as the active power and motion control stage between an upper-level PLC and synchronous or induction motors, regulating torque and speed through closed-loop vector control. It is classified as an HCS Drive Controller, making it suitable for packaging, material-handling, and assembly lines that require coordinated multi-axis movement. This arrangement lets the controller respond quickly to changing motion commands during positioning and speed-regulated operation.
The controller belongs to the HCS01 line and communicates with higher-level motion systems over the SERCOS III real-time bus, so parameter changes and diagnostic data are exchanged deterministically. Its mains power input accepts 3 x AC 200…500 V ±10 %, allowing use on both 230 V and 460 V factory grids without hardware changes. Internally, heat is removed by internal air cooling through an integrated blower, eliminating the need for an external fan tray. Continuous operation is protected by an IP20 housing that is intended for cabinet mounting. For short dynamic bursts, the power stage can supply up to 8 A of peak current, which helps with sizing for low-to-medium inertia axes.
Motion feedback enters through an IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface, while the second feedback port is left unpopulated to simplify wiring. The control section in this model is the ECONOMY type. The product is Design Version 1, indicating the first design revision. Power is supplied by an infeeding/feeded power supply unit, allowing the drive to share a common DC bus with other axes. A dedicated safety interface is not included, so emergency stop functions must be handled upstream.
Frequently Asked Questions about HCS01.1E-W0008-A-03-E-S3-EC-NN-NN-LF-FW:
Q: What communication interface does the HCS01.1E-W0008-A-03-E-S3-EC-NN-NN-LF-FW use?
A: The HCS01.1E-W0008-A-03-E-S3-EC-NN-NN-LF-FW controller supports communication via SERCOS III.
Q: How is the HCS01.1E-W0008-A-03-E-S3-EC-NN-NN-LF-FW drive controller cooled?
A: Cooling for this unit is handled internally using an integrated blower.
Q: What is the peak current of the HCS01.1E-W0008-A-03-E-S3-EC-NN-NN-LF-FW controller?
A: This device is rated for a device peak current of 8 A.
Q: What mains voltage range is supported by this drive controller?
A: The HCS01.1E-W0008-A-03-E-S3-EC-NN-NN-LF-FW operates on a mains voltage of 3 x AC 200...500 V ±10%.
Q: What is the IP rating of the HCS01.1E-W0008-A-03-E-S3-EC-NN-NN-LF-FW drive controller?
A: This controller is equipped with an IP20 protection rating.
