HCS01.1E-W0008-A-03-E-S3-EC-NN-L4-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911331680
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0008-A-03-E-S3-EC-NN-L4-NN-FW is a drive controller in the HCS IndraDrive Controllers series. It features an integrated air cooling blower and supports a device peak current of 8 Amps with an IP20 rating. The drive is equipped with a SERCOS III communication interface and supports encoder interfaces such as IndraDyn Hiperface and EnDat 2.1/2.2, as well as STO and SBC safety functions.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0008-A-03-E-S3-EC-NN-L4-NN-FW drive controller is manufactured by Bosch Rexroth Indramat and belongs to the HCS IndraDrive Controllers series in the HCS01 line. It links three-phase mains to servo or induction motors by converting incoming electrical power into controlled motor output while carrying out motion commands from the machine control. Within industrial automation, it provides current, velocity, and position regulation so multiple axes can run in coordinated motion on production, handling, and packaging equipment. It is used where stable axis control and synchronized motor response are required during repeated machine cycles.
The device delivers a peak output of 8 A, allowing short-term torque demand without overloading the power semiconductors. It accepts a three-phase supply of 3 x AC 200…500 V ±10%, so it can operate from common industrial mains within that voltage range. The enclosure is rated IP20, which means the unit is intended for installation inside an electrical cabinet rather than on an exposed machine surface. Because of that enclosure class, protection against direct contact depends on the surrounding cabinet and panel layout. Motion commands and status data are exchanged over SERCOS III, supporting tightly timed coordination with other axes on the same control network. Integrated safety includes STO (Safe Torque Off) and SBC (Safe Brake Control), which remove torque and control the brake circuit during a stop condition.
The power section is paired with a control section labeled ECONOMY, and it still supports cyclic SERCOS communication for drive control. The energy path is classified as Infeeding / Feeded, which means the unit can receive regenerated energy from decelerating axes and return it to the DC link. Motor feedback is connected through the IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface, while the second interface slot is left empty. This arrangement keeps the feedback connection limited to the primary motor interface used by the drive. Thermal management uses internal air cooling from an integrated blower, so no external heat-sink duct is required.
Frequently Asked Questions about HCS01.1E-W0008-A-03-E-S3-EC-NN-L4-NN-FW:
Q: What communication interface is available on the HCS01.1E-W0008-A-03-E-S3-EC-NN-L4-NN-FW controller?
A: This model uses the SERCOS III communication interface for connectivity.
Q: What is the device peak current for the HCS01.1E-W0008-A-03-E-S3-EC-NN-L4-NN-FW drive controller?
A: The peak current supported by this device is 8 A.
Q: What cooling method is used in the HCS01.1E-W0008-A-03-E-S3-EC-NN-L4-NN-FW controller?
A: The HCS01.1E-W0008-A-03-E-S3-EC-NN-L4-NN-FW controller is cooled by an integrated air blower for internal air cooling.
Q: What mains voltage range does the HCS01.1E-W0008-A-03-E-S3-EC-NN-L4-NN-FW support?
A: The supported mains voltage for this drive controller is 3 x AC 200 to 500 V with a 10% tolerance.
Q: What safety interfaces are included in the HCS01.1E-W0008-A-03-E-S3-EC-NN-L4-NN-FW drive controller?
A: This controller comes with STO (Safe Torque Off) and SBC (Safe Brake Control) safety interfaces.
