HCS01.1E-W0008-A-03-E-S3-EC-EP-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911371824
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0008-A-03-E-S3-EC-EP-NN-NN-FW is part of the HCS IndraDrive Controllers series and features a SERCOS III communication interface and an ECONOMY control section design. This HCS drive controller has a peak current of 8 Amps, supports encoder interfaces like IndraDyn Hiperface and EnDat 2.1/2.2, and uses an integrated blower for internal air cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0008-A-03-E-S3-EC-EP-NN-NN-FW is an HCS Drive Controller manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. Housed in a compact HCS01 frame, it serves as the regulated interface between a shared DC bus supply and connected servo or induction motors, converting motion commands from higher-level PLCs into precisely metered current. By closing the control loop at the drive level, the unit supports repeatable positioning and speed regulation in automated production lines, conveyors, and material-handling stations. This arrangement lets the controller regulate torque and speed close to the motor, which helps maintain consistent motion when load conditions change during operation.
The drive accepts a three-phase input range of 3 × AC 200–500 V ±10%, allowing the same unit to operate on different plant power systems. A peak output current of 8 A supports rapid acceleration and brief overloads during dynamic motion. Heat is removed by internal air cooling through an integrated blower, reducing reliance on cabinet airflow. Deterministic network communication is handled through SERCOS III, and the real-time link supports cyclic command exchange with higher-level automation. The IP20 enclosure helps prevent accidental finger contact with live parts, so the controller must be installed in a protected control cabinet. Encoder position data is received through Interface 1, allowing the drive to use absolute feedback without an additional converter module.
The control section in this device is the ECONOMY variant, which is matched to the power stage in the type code. The design version is version 1, and the power module operates on an infeeding DC bus so recovered braking energy can be shared on the common DC bus. Absolute encoders connect through the Hiperface/EnDat 2.1/2.2 interface. The type code does not indicate additional design features beyond the base controller configuration. The unit has no integrated safety interface, so STO or similar safety functions must be provided by external equipment.
Frequently Asked Questions about HCS01.1E-W0008-A-03-E-S3-EC-EP-NN-NN-FW:
Q: What communication interface does the HCS01.1E-W0008-A-03-E-S3-EC-EP-NN-NN-FW controller use?
A: The HCS01.1E-W0008-A-03-E-S3-EC-EP-NN-NN-FW supports the SERCOS III communication interface for data exchange with compatible automation systems.
Q: How is the HCS01.1E-W0008-A-03-E-S3-EC-EP-NN-NN-FW cooled?
A: This controller uses internal air cooling facilitated by an integrated blower for temperature regulation.
Q: What is the peak current rating of the HCS01.1E-W0008-A-03-E-S3-EC-EP-NN-NN-FW?
A: The device provides a peak current of 8 A to connected loads.
Q: What level of ingress protection does the HCS01.1E-W0008-A-03-E-S3-EC-EP-NN-NN-FW offer?
A: An IP20 rating ensures the HCS01.1E-W0008-A-03-E-S3-EC-EP-NN-NN-FW is protected against solid objects over 12 mm but provides no protection against liquids.
Q: What mains voltage can the HCS01.1E-W0008-A-03-E-S3-EC-EP-NN-NN-FW handle?
A: The controller operates on a mains voltage range of three-phase AC 200 to 500 V with a tolerance of plus or minus 10%.
