HCS01.1E-W0008-A-03-B-ET-EC-PB-S4-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911341742
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0008-A-03-B-ET-EC-PB-S4-NN-FW is an HCS Drive Controller in the HCS IndraDrive Controllers series. It features MultiEthernet and PROFIBUS communication interfaces, supports a device peak current of 8 Amps, and has an IP20 rating. The controller uses air cooling with an internal blower and supports encoder interfaces like IndraDyn Hiperface and EnDat 2.1/2.2.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0008-A-03-B-ET-EC-PB-S4-NN-FW is a drive controller produced by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It belongs to the HCS01 line and carries design version 1, placing it among smaller inverters used to regulate synchronous and induction motors in multi-axis machinery. As a central component of an automation cabinet, the unit converts incoming three-phase power and executes motion commands issued by the associated control system. It is intended for cabinet-based motion control where stable motor response and coordinated axis behavior are required.
This controller accepts a mains supply of 3 x AC 200 to 500 V ±10% and can deliver up to 8 A of peak output current to the connected motor. Internal thermal management is handled by internal air cooling through an integrated blower, so no external heat sink is required. Because cooling air is moved internally, the surrounding panel space should allow unobstructed airflow through the controller body. The housing carries an ingress protection rating of IP20, which indicates touch-safe terminals but no water sealing and is typical for installation inside closed panels. For plant networking, the power section integrates MultiEthernet, allowing parameter exchange over common industrial Ethernet protocols without separate gateway hardware. The enclosure is intended for use behind a protective cabinet door rather than in exposed washdown areas.
The control section fitted to this model is the BASIC version. The power stage uses infeeding or DC-bus-fed operation, which supports shared DC-bus topologies in multi-axis systems. Feedback from the motor arrives via the IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface, while higher-level PLCs can exchange cyclic data across PROFIBUS. This arrangement separates motor feedback handling from network communication so motion data and controller commands can be managed through dedicated connections. No supplemental design features are specified for this configuration.
Frequently Asked Questions about HCS01.1E-W0008-A-03-B-ET-EC-PB-S4-NN-FW:
Q: What communication interface does the HCS01.1E-W0008-A-03-B-ET-EC-PB-S4-NN-FW use?
A: The HCS01.1E-W0008-A-03-B-ET-EC-PB-S4-NN-FW supports MultiEthernet communication for flexible network integration.
Q: What is the device peak current rating of the HCS01.1E-W0008-A-03-B-ET-EC-PB-S4-NN-FW?
A: This drive controller operates with a device peak current of 8 A, suitable for moderate power applications.
Q: How is the HCS01.1E-W0008-A-03-B-ET-EC-PB-S4-NN-FW cooled?
A: The controller uses an internal cooling method via an integrated blower for thermal management.
Q: What is the IP rating of the HCS01.1E-W0008-A-03-B-ET-EC-PB-S4-NN-FW drive controller?
A: The HCS01.1E-W0008-A-03-B-ET-EC-PB-S4-NN-FW has an IP20 rating, providing basic protection against solid objects larger than 12.5 mm.
Q: What mains voltage range does the HCS01.1E-W0008-A-03-B-ET-EC-PB-S4-NN-FW support?
A: This model accepts a mains voltage input of 3 x AC 200...500 V ±10%, accommodating a wide range of industrial supply voltages.
