HCS01.1E-W0008-A-03-B-ET-EC-PB-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911327324
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0008-A-03-B-ET-EC-PB-NN-NN-FW is an HCS Drive Controller from the HCS IndraDrive Controllers series. It features MultiEthernet and PROFIBUS communication interfaces, and supports encoder interfaces such as IndraDyn Hiperface and EnDat 2.1/2.2. The controller has an internal air cooling method with a device peak current of 8 Amps and an IP20 rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat’s HCS01.1E-W0008-A-03-B-ET-EC-PB-NN-NN-FW belongs to the HCS IndraDrive Controllers series and functions as a compact drive controller for servo and induction axes in automated machinery. By combining the power section with a modular control section, the unit supplies regulated current to connected motors and exchanges status data with higher-level PLCs, forming the motion layer of material-handling lines, packaging cells, and assembly stations. It is intended for cabinet-based installations where compact axis control and integrated communications are required, and a dedicated safety interface is not fitted so external safety relays must supervise the axis.
The power hardware accommodates a three-phase supply of 3 x AC 200…500 V ±10%, letting a single controller operate on global mains without rewiring. During acceleration peaks, the device can deliver up to 8 A to the motor windings, while the integrated overcurrent logic intervenes when this limit is exceeded. Thermal energy is removed by internal air cooling through an integrated blower, so no external ducting is required inside the cabinet. The housing carries an IP20 rating, which provides basic touch protection when the unit is mounted in an enclosure and leaves additional protection to the surrounding cabinet. For plant networking, the power section is factory-wired to a MultiEthernet port, enabling real-time traffic over EtherNet/IP, PROFINET, or EtherCAT without additional option cards and allowing the controller to fit mixed automation platforms.
The attached control section uses the BASIC design in version 1 and is paired to the power section at the factory for consistent operation within the drive assembly. Command feedback is accepted through the IndraDyn Hiperface/EnDat 2.1/2.2 encoder connector, while fieldbus telegrams can also be exchanged over the integrated PROFIBUS interface for legacy cells that still rely on established network layouts. DC link energy is managed by an infeeding and feeding power supply concept that allows common-bus operation with other drives and supports shared energy flow within a coordinated system.
Frequently Asked Questions about HCS01.1E-W0008-A-03-B-ET-EC-PB-NN-NN-FW:
Q: What communication interface is available on the HCS01.1E-W0008-A-03-B-ET-EC-PB-NN-NN-FW controller?
A: The HCS01.1E-W0008-A-03-B-ET-EC-PB-NN-NN-FW supports a MultiEthernet communication interface.
Q: How is the HCS01.1E-W0008-A-03-B-ET-EC-PB-NN-NN-FW cooled?
A: This drive controller uses internal air cooling through an integrated blower.
Q: What is the device peak current for the HCS01.1E-W0008-A-03-B-ET-EC-PB-NN-NN-FW?
A: The device has a peak current rating of 8 A, allowing for handling higher load demands during short intervals.
Q: What encoder interface does the HCS01.1E-W0008-A-03-B-ET-EC-PB-NN-NN-FW offer?
A: This unit is equipped with an Encoder IndraDyn Hiperface/EnDat 2.1/2.2 interface on Interface 1.
Q: What mains voltage range does the HCS01.1E-W0008-A-03-B-ET-EC-PB-NN-NN-FW support?
A: The HCS01.1E-W0008-A-03-B-ET-EC-PB-NN-NN-FW is rated for a mains voltage of 3 x AC 200...500 V ±10%.
