HCS01.1E-W0008-A-03-B-ET-EC-PB-L4-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911331606
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0008-A-03-B-ET-EC-PB-L4-NN-FW is an HCS Drive Controller belonging to the HCS IndraDrive Controllers series. It features MultiEthernet and PROFIBUS communication interfaces with an encoder compatibility of IndraDyn Hiperface or EnDat 2.1/2.2. The controller provides a peak current of 8 Amps, uses internal air cooling with an integrated blower, and is rated IP20.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0008-A-03-B-ET-EC-PB-L4-NN-FW is a compact drive controller in the HCS IndraDrive Controllers series manufactured by Bosch Rexroth Indramat. Classified as a drive controller, it converts three-phase mains power into regulated motor output for precise torque and velocity control in automated assembly stations and servo-driven conveyor axes. The device sits between the plant supply network and the servomotor, executing closed-loop commands from a higher-level controller to maintain motion accuracy during production cycles. This arrangement allows the axis to respond quickly to changing load conditions while keeping motion consistent during repetitive machine tasks. Its compact format also suits control cabinets where space is limited and multiple axes are installed close together.
The controller runs on a rated three-phase input of 200–500 V AC, giving it flexibility for global power grids without tap changing. Internally, heat is removed by an internal air blower, so cabinet airflow can support thermal management without added ducting. Its housing carries an IP20 rating, which protects against finger contact while remaining suitable for panel installation. The integrated power section can deliver a device peak current of 8 A, supporting short acceleration bursts for low-inertia servo axes. Motion commands are processed by the control section coded as BASIC, which provides standard positioning functions for general servo applications.
For deterministic machine networks, the unit offers a MultiEthernet port that can be configured for Sercos III, EtherNet/IP, PROFINET, or EtherCAT. A separate channel supports PROFIBUS for legacy PLC environments, which helps the controller fit mixed-control installations. This communication mix supports integration in newer Ethernet-based systems as well as existing fieldbus layouts. Encoder feedback is accepted through Hiperface/EnDat 2.1/2.2, allowing connection to compatible absolute encoder systems used for precise motor position data. Drive-based safety is handled by the dual-channel STO and SBC interface, which supports immediate torque removal and brake control functions. The unit is supplied in an infeeding and feeder topology so DC-bus energy can be shared among drives in the same system.
Frequently Asked Questions about HCS01.1E-W0008-A-03-B-ET-EC-PB-L4-NN-FW:
Q: What communication interface does the HCS01.1E-W0008-A-03-B-ET-EC-PB-L4-NN-FW support?
A: The HCS01.1E-W0008-A-03-B-ET-EC-PB-L4-NN-FW supports MultiEthernet as its primary communication interface.
Q: What is the peak current capability of the HCS01.1E-W0008-A-03-B-ET-EC-PB-L4-NN-FW?
A: This drive controller has a device peak current rating of 8 A.
Q: How is the HCS01.1E-W0008-A-03-B-ET-EC-PB-L4-NN-FW cooled?
A: Cooling on this model is provided by an internal air system using an integrated blower.
Q: What mains voltage range does the HCS01.1E-W0008-A-03-B-ET-EC-PB-L4-NN-FW require?
A: The HCS01.1E-W0008-A-03-B-ET-EC-PB-L4-NN-FW is designed for use with 3-phase AC mains voltage from 200 to 500 V, ±10%.
Q: What safety features are included with the HCS01.1E-W0008-A-03-B-ET-EC-PB-L4-NN-FW drive controller?
A: This controller provides STO (Safe Torque Off) and SBC (Safe Brake Control) for safety functions.
