Product Description:

The HCS01.1E-W0008-A-03-B-ET-EC-NN-SB-NN-FW is a drive controller produced by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. In an industrial automation cell, it functions as the power and control interface between a three-phase supply and a connected motor, delivering regulated current so position, speed, and torque loops can be closed by the higher-level motion system. By packaging the inverter, feedback inputs, and fieldbus hardware in one unit, it simplifies cabinet wiring and setup for single-axis machines and multi-axis gantries. The integrated layout also reduces the need for separate interface modules inside the control cabinet.

The controller accepts supply voltages of 3 x AC 200 to 500 V ±10%, allowing direct connection to common low-voltage networks. During dynamic acceleration it can source up to 8 A, a peak current that affects motor selection and cable sizing. The housing carries an IP20 rating, meaning live parts are finger-safe but the unit must be mounted inside an enclosure for dust and water protection. For real-time communication it incorporates a MultiEthernet port, giving the choice of EtherNet/IP, PROFINET, EtherCAT, or SERCOS III without additional option cards. Motor position data are received over an encoder channel that supports IndraDyn Hiperface/EnDat 2.1/2.2, permitting high-resolution feedback from Rexroth and third-party transducers. The controller is part of the HCS01 line and is intended for compact power stages with outputs up to 12 A.

Thermal management is handled by internal air cooling through an integrated blower, eliminating the need for external ducting inside the cabinet. The control section is supplied in the BASIC configuration and identified as design version 1, which sets its fixed I/O and processing features. DC-bus energy exchange uses shared DC-bus infeeding, allowing several axes to operate from a common power module. No secondary interface is fitted on the option slot.