HCS01.1E-W0008-A-03-B-ET-EC-NN-S5-NN-AW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911399379
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0008-A-03-B-ET-EC-NN-S5-NN-AW is part of the HCS IndraDrive Controllers series. This drive controller has a device peak current of 8 Amps and operates with a mains voltage range of 3 x AC 200 to 500 Volts. It features a MultiEthernet communication interface and uses air cooling through an integrated blower.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0008-A-03-B-ET-EC-NN-S5-NN-AW drive controller is produced by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. As an AC servo drive component, it regulates the current and voltage delivered to synchronous or asynchronous motors so motion axes can follow velocity and position commands from a higher-level PLC. By combining the power section with real-time fieldbus connectivity, the unit serves as the actuator layer in conveyor, packaging, and material-handling systems.
Electrical supply flexibility is provided through a three-phase input range of 3 × AC 200–500 V ±10 %, which allows the same controller to operate in low- or medium-voltage plants without cabinet rewiring. The power section delivers a device peak current of 8 A, enabling short-duration overloads during acceleration while staying within the intended thermal operating range. An IP20 housing keeps live parts touch-safe inside a closed cabinet, but the unit is not intended for washdown areas. Thermal management relies on internal air cooling through an integrated blower, so the panel layout must allow unobstructed intake and exhaust paths. High-level communication is handled by the MultiEthernet interface, giving direct access to Sercos III, EtherNet/IP, or PROFINET networks without additional option cards.
The control section uses the BASIC version in the type code, so its I/O and functions are focused on standard motion tasks rather than safety-oriented extensions. Motor feedback is handled through Encoder IndraDyn Hiperface/EnDat 2.1/2.2, which allows absolute position evaluation over a single-cable hybrid lead. DC-link energy exchange uses infeed and regenerative power sharing, allowing several axes to share braking energy or accept returned energy. The unit belongs to the HCS01 line family and uses design version 1 for this drive platform.
Frequently Asked Questions about HCS01.1E-W0008-A-03-B-ET-EC-NN-S5-NN-AW:
Q: What type of communication interface is available on the HCS01.1E-W0008-A-03-B-ET-EC-NN-S5-NN-AW controller?
A: The HCS01.1E-W0008-A-03-B-ET-EC-NN-S5-NN-AW supports MultiEthernet for flexible industrial network connectivity.
Q: What is the device peak current for the HCS01.1E-W0008-A-03-B-ET-EC-NN-S5-NN-AW?
A: This drive controller accommodates a maximum device peak current of 8 A.
Q: How is the HCS01.1E-W0008-A-03-B-ET-EC-NN-S5-NN-AW cooled?
A: Cooling for this model is achieved using an integrated internal blower system.
Q: What mains voltage range is supported by the HCS01.1E-W0008-A-03-B-ET-EC-NN-S5-NN-AW?
A: The mains voltage for this model ranges from 3 x AC 200 to 500 V with a tolerance of plus or minus 10%.
Q: What level of protection does the IP20 rating provide for the HCS01.1E-W0008-A-03-B-ET-EC-NN-S5-NN-AW?
A: The IP20 rating indicates this drive controller offers protection against solid objects greater than 12.5 mm but no protection against water.
