HCS01.1E-W0008-A-03-B-ET-EC-NN-S4-NN-NW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911379375
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
6 Seconds
The Bosch Rexroth Indramat HCS01.1E-W0008-A-03-B-ET-EC-NN-S4-NN-NW is part of the HCS IndraDrive Controllers series. This drive controller features MultiEthernet communication and supports encoder interfaces such as IndraDyn Hiperface and EnDat 2.1/2.2. It is cooled by an internal integrated blower and has a device peak current of 8 Amps with an IP20 rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0008-A-03-B-ET-EC-NN-S4-NN-NW is a compact drive controller produced by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. It combines power electronics and motion control to regulate torque, speed, and position of connected servo or asynchronous motors used in conveyors, handling modules, and packaging equipment. Integrated parameter storage, network communication, and safe torque off support coordinated axis automation while helping reduce panel space and wiring complexity. This allows one controller to serve both steady-speed transport duties and positioning tasks that require closed-loop response during repeated machine cycles.
The controller accepts a three-phase supply of 3 x AC 200 to 500 V ±10% and delivers a device peak current of 8 A, giving sufficient headroom for rapid acceleration of low-inertia axes. Its IP20 enclosure requires installation inside a closed control cabinet while still providing touch protection at the unit. All real-time diagnostics and parameter telegrams pass through the MultiEthernet port, which supports EtherNet/IP, PROFINET, Powerlink, and Sercos communication. Motor feedback is handled by an onboard receiver compatible with Encoder IndraDyn Hiperface/EnDat 2.1/2.2, allowing absolute position capture and single-cable operation, and the unit does not include a second encoder channel. This arrangement keeps command, status, and feedback handling concentrated at the controller for compact cabinet layouts.
Thermal management uses internal air cooling through an integrated blower, so the module removes heat with its own fan rather than external ducting. The attached control section is classified as BASIC, providing standard motion functions and safe torque off without additional option cards. The unit is design version 1. The power stage supports common DC bus operation, so it can receive DC-bus energy from a supply unit and return regenerated energy during braking. This arrangement is suited to multi-axis installations where several drives share energy on the same DC bus.
Frequently Asked Questions about HCS01.1E-W0008-A-03-B-ET-EC-NN-S4-NN-NW:
Q: What communication interface does the HCS01.1E-W0008-A-03-B-ET-EC-NN-S4-NN-NW use?
A: The HCS01.1E-W0008-A-03-B-ET-EC-NN-S4-NN-NW supports communication over a MultiEthernet interface for flexible integration.
Q: How is the HCS01.1E-W0008-A-03-B-ET-EC-NN-S4-NN-NW cooled?
A: The drive controller features an internal air cooling method utilizing an integrated blower for thermal management.
Q: What is the peak current capacity of the HCS01.1E-W0008-A-03-B-ET-EC-NN-S4-NN-NW?
A: This unit is designed with a device peak current capacity of 8 A, allowing it to handle moderate power loads.
Q: What encoder interfaces are supported by the HCS01.1E-W0008-A-03-B-ET-EC-NN-S4-NN-NW?
A: The HCS01.1E-W0008-A-03-B-ET-EC-NN-S4-NN-NW is compatible with encoder interfaces such as IndraDyn Hiperface and EnDat 2.1/2.2 for feedback.
Q: What is the supported mains voltage range for the HCS01.1E-W0008-A-03-B-ET-EC-NN-S4-NN-NW?
A: The mains voltage range for this drive controller is 3-phase AC 200 to 500 V with ±10% tolerance.
