HCS01.1E-W0008-A-03-B-ET-EC-NN-S4-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911340077
The Bosch Rexroth Indramat HCS01.1E-W0008-A-03-B-ET-EC-NN-S4-NN-FW is part of the HCS IndraDrive Controllers series. This HCS drive controller supports MultiEthernet communication and uses air cooling with an integrated internal blower. It has a device peak current of 8 Amps and an IP20 rating, with an operating voltage range of 3 x AC 200 to 500 Volts plus or minus 10 percent.
Internal Product Review
The HCS01.1E-W0008-A-03-B-ET-EC-NN-S4-NN-FW is an HCS drive controller with MultiEthernet communication, well suited for streamlined networked automation. BASIC control architecture and internal blower cooling give the controller a clean, efficient design for enclosed drive cabinets. An 8 A peak current rating and 3 x AC 200...500 V ±10% input make the controller a strong choice for flexible IndraDrive integration.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0008-A-03-B-ET-EC-NN-S4-NN-FW drive controller is manufactured by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. It is an axis inverter that regulates motor torque and speed in distributed automation cells, linking servomotors to a higher-level PLC through its integrated control electronics. By converting three-phase mains power into controlled outputs, the unit supports precise positioning, energy recovery, and coordinated multi-axis motion. This controller is intended for cabinet-mounted servo applications that require stable closed-loop response during changing loads.
The controller accepts a 3 x AC 200 to 500 V ±10% supply, which covers common industrial power systems. An integrated blower provides internal air cooling, so no external ducting is required. During acceleration peaks, the inverter can deliver 8 A of output current, which helps determine suitable motor matching. The housing has IP20 protection, so it must be installed inside a closed cabinet. Because the enclosure is intended for cabinet use, surrounding equipment must provide the external barrier against accidental contact and contamination. Field networking is handled through MultiEthernet, which supports EtherNet/IP, PROFINET, and EtherCAT for synchronized command exchange.
The controller uses the BASIC control section, and advanced technology options are not included. Motor feedback enters through Interface 1, which accepts IndraDyn Hiperface/EnDat 2.1/2.2 encoder feedback for high-resolution absolute position data. The common DC bus uses an infeeding/feeded power supply unit, allowing energy exchange between axes during operation. The hardware format follows the HCS01 line and uses the 45 mm booksize width common across the range. Interface 2 is unused, and the narrow housing helps the controller fit beside other modules in compact drive assemblies.
