HCS01.1E-W0008-A-03-B-ET-EC-NN-NN-AA-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911331038
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
0 Seconds
The Bosch Rexroth Indramat HCS01.1E-W0008-A-03-B-ET-EC-NN-NN-AA-FW is a drive controller from the HCS IndraDrive Controllers series. It supports a MultiEthernet communication interface and operates on a mains voltage of 3 x AC 200 to 500 V with a peak current of 8 Amps. The controller features an IP20 rating, integrated air cooling, and encoder interfaces for IndraDyn Hiperface or EnDat 2.1/2.2.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0008-A-03-B-ET-EC-NN-NN-AA-FW is a compact drive controller produced by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. It belongs to the HCS01 line and is used to supply regulated power to servo axes while exchanging motion data with higher-level PLCs in automated cells. In that role, it converts incoming electrical power into controlled motor output for positioning and speed-regulated motion. Its compact format suits control cabinets where several motion components must fit into limited panel space without sacrificing axis control capability.
The controller accepts a mains input of 3 x AC 200...500 V ±10%, allowing the same unit to operate on low- or medium-voltage factory grids. Cooling is handled by internal air cooling through an integrated blower, so heat is moved through the unit without requiring a separate fan assembly for the drive itself. The power stage can provide momentary acceleration currents up to 8 A, and network communication is handled through the MultiEthernet interface for integration with common industrial Ethernet control systems. The housing is rated IP20, so the controller must be installed inside a protected enclosure and is protected against accidental finger contact rather than dust ingress.
Axis feedback is received through an IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface, and no secondary feedback interface is installed. The control section uses the Basic variant, so safety-related shutdown functions are handled by external equipment rather than an onboard safety interface. This layout keeps the connection scheme straightforward when only the primary feedback channel is required. The unit uses an infeed and fed power supply arrangement, which allows several controllers to share a common DC bus during regenerative operation and helps route returned energy to other connected axes. The drive is Design Version 1.
Frequently Asked Questions about HCS01.1E-W0008-A-03-B-ET-EC-NN-NN-AA-FW:
Q: What communication interface does the HCS01.1E-W0008-A-03-B-ET-EC-NN-NN-AA-FW drive controller support?
A: The HCS01.1E-W0008-A-03-B-ET-EC-NN-NN-AA-FW supports MultiEthernet communication, allowing versatile integration with various network environments.
Q: How is the HCS01.1E-W0008-A-03-B-ET-EC-NN-NN-AA-FW cooled?
A: This drive controller uses internal air cooling with an integrated blower for heat management.
Q: What is the peak current capacity of the HCS01.1E-W0008-A-03-B-ET-EC-NN-NN-AA-FW?
A: The peak device current for this model is rated at 8 A.
Q: What mains voltage does the HCS01.1E-W0008-A-03-B-ET-EC-NN-NN-AA-FW operate on?
A: The main supply voltage range for this drive is 3-phase AC 200 to 500 V with ±10% tolerance.
Q: What encoder interface is available on the HCS01.1E-W0008-A-03-B-ET-EC-NN-NN-AA-FW drive controller?
A: The HCS01.1E-W0008-A-03-B-ET-EC-NN-NN-AA-FW is equipped with an encoder interface compatible with IndraDyn Hiperface and EnDat 2.1/2.2.
