Product Description:

The HCS01.1E-W0008-A-03-B-ET-EC-EM-S4-NN-FW is a drive controller produced by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. This unit combines power electronics and a control section to command servo or asynchronous motors in automated equipment. By converting three-phase mains power and issuing precise torque commands, it serves as the actuator interface for packaging machines, pick-and-place stations, and material-handling axes in factory automation lines.

The drive accepts a supply of 3 x AC 200...500 V ±10%, so it can run directly from common industrial feeders on 50 Hz or 60 Hz grids. Thermal management relies on internal air cooling with an integrated blower, and the fan moves air across the heat sink without requiring external ducting. Motor windings are energized through an inverter leg that can source up to 8 A peak, enabling acceleration of small to medium axes. The control electronics use the BASIC configuration, providing standard motion-control functions and parameter storage on detachable memory. An enclosure rating of IP20 indicates touch-safe but non-sealed construction, so the unit must be installed inside a control cabinet.

System connectivity is handled by MultiEthernet, allowing the controller to communicate over EtherNet/IP, PROFINET, and EtherCAT without option cards. For feedback, Interface 1 reads IndraDyn Hiperface and EnDat 2.1/2.2 encoder feedback signals, while Interface 2 provides encoder emulation pulses so external controls can mirror position information. The power stage supports infeeding and fed operation, permitting energy exchange across a shared DC bus during braking or peak demand. Design version 1, the HCS01 line designation, and the pairing with the BASIC control section identify the controller layout used for this variant.