Product Description:

The HCS01.1E-W0008-A-03-B-ET-EC-EC-S5-NN-NW is a drive controller produced by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It regulates power flow between an AC mains supply and synchronous or asynchronous motors, enabling speed, torque, and position control in automated machinery and material-handling cells. By combining power electronics with closed-loop feedback interfaces, the unit links programmable logic controllers to the mechanical axis for coordinated motion control.

This controller communicates with supervisory networks over MultiEthernet, so a single hardware port can operate on EtherNet/IP, PROFINET, or other deterministic protocols without extra option cards. The power stage accepts a three-phase input of 3 × AC 200…500 V ±10 %, letting the same hardware serve installations that use 200 V or 480 V utility grids. During acceleration, the integrated IGBT bridge can deliver a peak output of 8 A to the motor windings, and this transient value sets the maximum admissible torque demand from the connected axis. Thermal losses are removed by internal air cooling through an onboard blower, so external cabinet airflow is not required. The IP20 housing limits finger contact with live parts and requires installation in a closed electrical enclosure that provides ambient protection.

The logic layer uses the BASIC control section, giving standard motion functions while keeping parameter sets compatible with higher-feature variants. Both feedback channels support IndraDyn Hiperface/EnDat 2.1/2.2 encoders, allowing dual-loop operation or redundant sensing without adapter boards. The unit is design version 1, which confirms the mechanical dimensions and connector placement used for this model. DC bus energy is managed by the integrated power module rated for infeeding and bus-fed operation, so it can operate as a standalone rectifier or share a common bus with additional drives.