Product Description:

The HCS01.1E-W0008-A-03-B-ET-EC-EC-S5-NN-FW is a drive controller manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. Positioned in the HCS01 line, the unit works as the link between a central PLC and connected servo or induction motors. It supplies regulated current to the motor windings and exchanges operating data with higher-level control logic so motion commands can be carried out with stable speed, torque, and position control. This role makes it suitable for compact machine axes where local drive regulation is needed without placing the motor current loop directly on the PLC.

The controller accepts a three-phase mains supply of 3 x AC 200...500 V ±10%, allowing direct connection to many industrial power systems without a separate transformer. Its power stage can deliver a device peak current of 8 A, which supports brief overload demand during acceleration and other short dynamic events. Communication with the supervisory network takes place over MultiEthernet, so the same hardware can be integrated into common industrial Ethernet environments through one communication interface. Operational heat is removed by internal air cooling through an integrated blower, and the IP20 enclosure helps protect against accidental finger contact while still requiring installation inside a control cabinet.

The electronics use the BASIC control section, which provides standard motion functions for general drive tasks. Both feedback sockets support IndraDyn Hiperface/EnDat 2.1/2.2 encoder signaling, allowing compatible single-turn or multi-turn motor encoders to be connected to the drive. The DC link uses an infeeding and fed power supply topology, which allows multiple axes on the same bus to share energy during changing load conditions. The product uses Design version 1 in the type code, indicating the specified build for this controller.