HCS01.1E-W0008-A-03-B-ET-EC-EC-NN-NN-NW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911375325
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
57 Seconds
The Bosch Rexroth Indramat HCS01.1E-W0008-A-03-B-ET-EC-EC-NN-NN-NW is part of the HCS IndraDrive Controllers series and is designed in the BASIC configuration. This drive controller supports MultiEthernet communication, has a peak current of 8 Amps, and uses air cooling through an integrated blower. It features dual encoder interfaces for IndraDyn Hiperface or EnDat 2.1/2.2 and operates with an input voltage range of 200 to 500 Volts AC with an IP20 rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0008-A-03-B-ET-EC-EC-NN-NN-NW is a drive controller produced by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It belongs to the compact HCS01 family and supplies regulated power and motion commands to servo or spindle axes in distributed automation cells. By integrating power electronics, control logic, and fieldbus connectivity in a single housing, the unit helps simplify cabinet layouts in automated equipment. It is intended for motion applications that need coordinated axis control from a compact controller footprint.
A three-phase input of 200 to 500 V AC with a tolerance of ±10% allows the controller to operate across common industrial mains ranges without taps or transformers. The device can deliver a peak phase current of 8 A, supporting short acceleration bursts before it returns to continuous limits. Cooling is handled by internal air cooling, which uses an integrated blower to move heat away from the IGBTs without external ducting. Command and diagnostic data are transferred over a Multi-Ethernet port, providing access to EtherNet/IP, PROFINET, and EtherCAT through the same interface. This communication arrangement supports flexible network integration with higher-level control systems. The control section uses the BASIC configuration, which omits additional technology options and supports standard drive applications.
The housing carries an IP20 rating, so it must be mounted inside a protected cabinet and still allows convenient pluggable wiring. The controller is design Version 1, and power is exchanged with the DC bus through infeeding and fed operation, which allows energy sharing between multiple axes. Two encoder sockets support feedback connections up to EnDat 2.2 for high-resolution position data. Encoder feedback allows the controller to regulate speed and position accurately on connected axes. There is no safety interface, and no additional design features are listed for this variant.
