HCS01.1E-W0008-A-03-B-ET-EC-EC-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911327328
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0008-A-03-B-ET-EC-EC-NN-NN-FW is part of the HCS IndraDrive Controllers series. This drive controller features MultiEthernet communication and supports encoder interfaces such as IndraDyn Hiperface and EnDat 2.1/2.2. It has a device peak current of 8 Amps, uses an internal air cooling method with an integrated blower, and holds an IP20 rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0008-A-03-B-ET-EC-EC-NN-NN-FW is an HCS Drive Controller produced by Bosch Rexroth Indramat as part of the HCS IndraDrive Controllers series. The unit conditions three-phase power, regulates motor current, and exchanges feedback data so that servo axes follow commanded motion profiles in automated machinery. Its role is to convert incoming electrical power into controlled motor output while maintaining stable axis response during speed and position changes. It is intended for applications that require compact closed-loop drive control and consistent communication with connected motion components.
The controller accepts a nominal mains range of 3 x AC 200...500 V ±10%, allowing the same hardware to operate on low- or medium-voltage bus sections without transformer adjustment. Inside the housing, internal air cooling through an integrated blower moves heat away from the IGBT stack so full output can be delivered continuously. Peak output current is 8 A, which suits small to mid-frame servo motors used on secondary axes. Network traffic passes through a MultiEthernet port, enabling real-time communication over EtherNet/IP, PROFINET, or EtherCAT without additional option cards. An IP20 enclosure rating means the drive must be mounted inside a cabinet while remaining protected against accidental finger contact and vertically falling debris.
A BASIC control section handles axis computation. Position feedback is connected through dual IndraDyn Hiperface/EnDat 2.1/2.2 encoder ports, giving the machine builder a choice of single-turn or multi-turn absolute transducers. DC bus energy is exchanged with the plant supply because the power stage is specified as infeeding and fed, which supports common DC link configurations that share braking or regenerated power. The unit is Design Version 1. This arrangement supports closed-loop operation with compatible motors and keeps the controller aligned with common IndraDrive feedback options. The safety interface is not equipped, so external safety relays must interrupt the mains contactor.
Frequently Asked Questions about HCS01.1E-W0008-A-03-B-ET-EC-EC-NN-NN-FW:
Q: What type of communication interface does the HCS01.1E-W0008-A-03-B-ET-EC-EC-NN-NN-FW use?
A: This drive controller supports a MultiEthernet communication interface for network connections.
Q: How is the HCS01.1E-W0008-A-03-B-ET-EC-EC-NN-NN-FW drive controller cooled?
A: The cooling method is achieved using an internal air system with an integrated blower.
Q: What is the operating mains voltage range for the HCS01.1E-W0008-A-03-B-ET-EC-EC-NN-NN-FW?
A: This controller operates at a mains voltage range of 3 x AC 200 to 500 V with a ±10% tolerance.
Q: What is the maximum device peak current of the HCS01.1E-W0008-A-03-B-ET-EC-EC-NN-NN-FW?
A: It can provide a peak current of up to 8 A during operation.
Q: Which encoder interfaces are available on the HCS01.1E-W0008-A-03-B-ET-EC-EC-NN-NN-FW?
A: IndraDyn Hiperface or EnDat 2.1/2.2 encoder interfaces are available on this device.
