HCS01.1E-W0008-A-03-B-ET-EC-EC-L2-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911322442
Ask for AvailabilityThe Bosch Rexroth Indramat HCS01.1E-W0008-A-03-B-ET-EC-EC-L2-NN-FW is an HCS Drive Controller from the HCS IndraDrive Controllers series. It has a MultiEthernet communication interface, supports encoder interfaces such as IndraDyn Hiperface and EnDat 2.1/2.2, and uses internal air cooling with an integrated blower. The device features an IP20 protection rating, operates at a mains voltage range of 3 x AC 200 to 500 V, and has a peak current of 8 Amps.
Internal Product Review
The HCS01.1E-W0008-A-03-B-ET-EC-EC-L2-NN-FW is an HCS drive controller that stands out for BASIC control architecture and MultiEthernet communication. Internal blower air cooling supports consistent thermal control, and the 8 A peak current provides capable performance for compact drive applications. A well-executed controller for flexible integration and dependable operation.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0008-A-03-B-ET-EC-EC-L2-NN-FW is a drive controller manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It belongs to the HCS01 line and serves as the regulated power stage for servo and induction motors in automated production equipment. The unit accepts a three-phase supply, conditions incoming power, and executes motion commands from a PLC. In production systems, it regulates current and voltage so motors can follow commanded speed, torque, and position values. This makes it suitable for packaging, handling, and other automation axes that require repeatable motion.
Communication is handled through MultiEthernet, which supports direct connection to EtherNet/IP, PROFINET, and EtherCAT networks. The mains input range is 3 x AC 200–500 V ±10%, allowing operation on a wide range of industrial power systems. The controller can supply up to 8 A of peak current, and its enclosure is rated IP20, so it is intended for installation inside a control cabinet. Heat is removed by internal air cooling with an integrated blower, which keeps the power section ventilated without requiring an external fan tray. Onboard current monitoring helps protect the output stage during dynamic load changes and short overload events.
Motor feedback is accepted through an Encoder IndraDyn Hiperface/EnDat 2.1/2.2 input, allowing use with compatible high-resolution encoder systems. A second encoder port can be used for redundant or alternate feedback routing, depending on the connected motor arrangement. The DC bus connection follows the Infeeding / Feeded arrangement, which supports common-bus operation with other compatible drives. The unit is design version 1, and the control section is listed as BASIC. This pairing matches the required control section for this unit.
