HCS01.1E-W0008-A-03-A-ET-EC-EM-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911375896
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0008-A-03-A-ET-EC-EM-NN-NN-FW is an HCS Drive Controller in the HCS IndraDrive Controllers series. It features a MultiEthernet communication interface, a peak current of 8 Amps, and an air cooling method using an integrated blower. The controller includes encoder interfaces for IndraDyn Hiperface and EnDat 2.1 or 2.2 and is rated at IP20 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0008-A-03-A-ET-EC-EM-NN-NN-FW is a drive controller produced by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series and assigned to the HCS01 line. In an automation system, it closes the power and feedback loop between the mains supply and compatible servo or induction motors so axis commands from a higher-level PLC can be executed with stable current and speed control. By processing encoder signals and supervising voltage, current, and fault states, the unit supports positioning, speed regulation, and coordinated multi-axis motion in a compact cabinet-mounted format.
This controller connects to plant networks through a MultiEthernet port, allowing communication over EtherNet/IP, PROFINET, and other Ethernet-based protocols. Heat is removed by internal air cooling through an integrated blower, so no external cooling plate is required for normal installation. The unit tolerates a peak load of 8 A, which allows short acceleration demands without immediate overcurrent shutdown. Its power input is rated at 3 x AC 200...500 V ±10%, covering a wide range of common three-phase plant supplies. The enclosure carries an IP20 rating, which helps limit accidental finger contact when the controller is installed inside a cabinet. The power stage supports infeeding and fed operation, allowing the module to receive DC bus energy from another unit or return regenerated energy to the front-end converter.
The controller is identified as Design Version 1, and the control section is paired with the BASIC (B) power section. Its primary feedback connection supports Encoder IndraDyn Hiperface/EnDat 2.1/2.2 devices, giving the drive compatibility with several common motor feedback formats used in Rexroth motion systems. A secondary interface provides Encoder emulation signals for legacy equipment that requires replicated feedback information. No integrated safety interface is included, so functions such as safe torque off must be handled by external hardware. This arrangement keeps the unit focused on core drive control, network communication, and encoder processing without adding extra onboard safety circuitry.
Frequently Asked Questions about HCS01.1E-W0008-A-03-A-ET-EC-EM-NN-NN-FW:
Q: What communication interface is featured on the HCS01.1E-W0008-A-03-A-ET-EC-EM-NN-NN-FW controller?
A: The HCS01.1E-W0008-A-03-A-ET-EC-EM-NN-NN-FW controller offers a MultiEthernet communication interface for versatile network integration.
Q: How is the HCS01.1E-W0008-A-03-A-ET-EC-EM-NN-NN-FW controller cooled?
A: This model uses internal air cooling with an integrated blower for temperature management.
Q: What is the peak current capability of the HCS01.1E-W0008-A-03-A-ET-EC-EM-NN-NN-FW?
A: The controller supports a device peak current of 8 A.
Q: Which encoder interfaces does the HCS01.1E-W0008-A-03-A-ET-EC-EM-NN-NN-FW support?
A: It is compatible with encoder interfaces such as IndraDyn Hiperface and EnDat 2.1/2.2.
Q: What level of protection does the IP20 rating offer for the HCS01.1E-W0008-A-03-A-ET-EC-EM-NN-NN-FW?
A: The controller is rated IP20, providing basic protection against solid objects.
