Product Description:

The HCS01.1E-W0008-A-03-A-ET-EC-EM-L4-NN-FW is a drive controller produced by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It regulates power flow between the mains and IndraDyn servo or synchronous motors so axes can accelerate, brake, and hold position in automated cells, packaging machines, or handling systems. The controller combines power electronics with motion interfaces, allowing the paired BASIC control section to manage velocity, torque, and safety functions in a compact cabinet-mounted housing.

This unit exchanges control data over the factory network through a MultiEthernet port that supports several real-time fieldbus protocols without additional hardware. Thermal management is handled by internal air cooling with an integrated blower, so no external fan tray is required. The device can deliver up to 8 A of peak output current, which provides headroom for short acceleration bursts above continuous load. It connects to three-phase mains in the range of 200 to 500 V AC with a tolerance of plus or minus 10 percent, making it suitable for both 230 V and 400 V plant supplies. The enclosure has an IP20 rating, so it is intended for cabinet installation where finger-safe touch protection is required and direct liquid exposure is not expected.

For motor feedback, Interface 1 accepts an IndraDyn Hiperface or EnDat 2.1/2.2 encoder interface, while Interface 2 provides unpowered encoder emulation so downstream devices can mirror motor position. Functional safety is built in through STO and SBC channels, which interrupt torque and command the brake without extra relays. The power section supports infeeding and fed operation, allowing energy exchange between multiple axes on a common DC bus. The unit is design version 1 within the HCS01 line, and its internal layout matches the mechanical format used for this controller class.