HCS01.1E-W0008-A-03-A-ET-EC-DA-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911373470
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0008-A-03-A-ET-EC-DA-NN-NN-FW is part of the HCS IndraDrive Controllers series. This drive controller features a MultiEthernet communication interface and supports encoder types such as IndraDyn Hiperface and EnDat 2.1/2.2. It is rated for a peak device current of 8 Amps and has an IP20 rating with air cooling through an integrated blower.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0008-A-03-A-ET-EC-DA-NN-NN-FW is a drive controller produced by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. As an HCS drive controller, it regulates torque, speed, and position for connected IndraDyn servo motors inside automated machinery. It modulates supplied three-phase power and exchanges real-time motion data with higher-level PLCs. This makes the unit suitable for coordinated motion tasks in packaging, handling, and other automated systems that require stable axis response.
This controller links directly to factory networks through the MultiEthernet communication interface, allowing access over several Ethernet-based protocols without additional option cards. Heat generated by the power electronics is removed by internal air cooling that uses an integrated blower, so no external heat sink is required. During acceleration surges, the inverter section can deliver a peak current of 8 A, while continuous operation is supported from utility grids supplying 3 × AC 200…500 V ±10%. The electronics are housed in an IP20 enclosure, so the unit is intended for closed electrical cabinets and provides basic protection against finger contact and settled dust. The cooling arrangement keeps airflow inside the unit and supports installation in compact control cabinets.
The hardware follows Design Version 1 of the HCS01 line and accepts feedback through the multifunction IndraDyn Hiperface/EnDat 2.1/2.2 encoder connection. The control section uses the BASIC (B) configuration for that feedback interface, allowing compatibility with common servo motor feedback formats used in the platform. Power exchange with the DC bus is handled by an infeeding or line-fed supply concept, which allows regenerative braking energy return or rectifier feeding depending on cabinet topology. The unit has no integrated safety interface, so safe-torque-off or category 3 stop functions must be provided by external safety hardware.
Frequently Asked Questions about HCS01.1E-W0008-A-03-A-ET-EC-DA-NN-NN-FW:
Q: What communication interface does the HCS01.1E-W0008-A-03-A-ET-EC-DA-NN-NN-FW drive controller use?
A: This model supports MultiEthernet for flexible network connectivity.
Q: How is the HCS01.1E-W0008-A-03-A-ET-EC-DA-NN-NN-FW drive controller cooled?
A: Cooling is managed by air circulation using an integrated internal blower.
Q: What is the peak current output capability of the HCS01.1E-W0008-A-03-A-ET-EC-DA-NN-NN-FW controller?
A: The device provides a peak current output of 8 A for demanding operations.
Q: What type of encoder interface is available on the HCS01.1E-W0008-A-03-A-ET-EC-DA-NN-NN-FW?
A: This controller uses encoder interfaces compatible with IndraDyn Hiperface and EnDat 2.1/2.2 standards.
Q: What is the IP rating of the HCS01.1E-W0008-A-03-A-ET-EC-DA-NN-NN-FW drive controller?
A: The controller has an IP20 rating, providing limited protection against solid objects but no water protection.
