Product Description:

The HCS01.1E-W0008-A-03-A-CC-EC-ET-S4-NN-FW is a compact drive controller manufactured by Bosch Rexroth Indramat as part of the HCS IndraDrive Controllers series. In an industrial automation cell, this component converts three-phase mains power into controlled output stages and supervises axis motion through its integrated control section. By combining power electronics, sensor feedback conditioning, and network interfaces inside a single housing, the device streamlines cabinet wiring and coordinates synchronized motor operation across packaging, printing, and material-handling machines.

To interface with plant power, the controller accepts a supply of 3 x AC 200...500 V ±10%, allowing deployment on both 200 V and 480 V grids without hardware changes. When rapid acceleration is required, the converter can deliver a peak output current of 8 A, providing a short-term current reserve that helps prevent undervoltage in the velocity loop. Heat is removed by internal air cooling through an integrated blower, so no external fan tray is needed. An IP20 housing limits ingress to finger-safe openings and indicates that the unit must be mounted inside a control cabinet. Encoder feedback arrives through the Encoder IndraDyn Hiperface/EnDat 2.1/2.2 port, enabling absolute position acquisition for Rexroth synchronous motors. Design version 1 carries no optional mechanical features.

The control section fitted to this hardware is the ADVANCED variant, providing extended logic and safety functions while remaining compatible with the SERCOS III master (cross communication) backbone used for real-time ring topology. A second fieldbus port, MultiEthernet, permits connection to EtherNet/IP, PROFINET, or EtherCAT networks without add-on cards, easing integration with mixed network architectures. The power module supports infeeding and fed operation, allowing common DC-bus sharing among multiple drives so braking energy can be regenerated.