HCS01.1E-W0008-A-03-A-CC-EC-ET-L4-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911338049
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
28 Seconds
The Bosch Rexroth Indramat HCS01.1E-W0008-A-03-A-CC-EC-ET-L4-NN-FW is an HCS Drive Controller from the HCS IndraDrive Controllers series. It features an ADVANCED control section, SERCOS III master communication, and MultiEthernet interface. The drive supports a device peak current of 8 Amps and has STO and SBC safety interfaces.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0008-A-03-A-CC-EC-ET-L4-NN-FW is a drive controller from Bosch Rexroth Indramat in the HCS IndraDrive Controllers series. It regulates synchronous or induction motors on production lines, pick-and-place modules, and packaging equipment by converting three-phase input power into controlled output pulses. Integrated motion control and safety functions let the unit coordinate axis movement, support precise speed and torque regulation, and reduce the need for separate external control hardware in compact cabinet layouts.
The controller is rated for a line supply of 3 × AC 200…500 V ±10%, allowing use across common industrial power ranges without an external transformer. Heat is removed by internal air cooling through an integrated blower, which supports continuous operation without external ducting. During dynamic load changes, the power section can deliver a peak current of 8 A, which sets the short-term current available for motor acceleration and transient torque demand. For networked motion control, the unit uses a SERCOS III master with cross communication channel for deterministic cyclic data exchange between axes, and the IP20 enclosure means it must be mounted inside a protected control cabinet.
The removable control section is the ADVANCED type in version 1, and it mates with the HCS01 power stage. Position and speed signals are processed through an IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface, allowing the drive to work with compatible motor feedback systems. Higher-level controllers can exchange status and control data through the built-in MultiEthernet port, which supports mixed-protocol communication within the machine network. Safety functions include STO (Safe Torque Off) and SBC (Safe Brake Control), allowing the controller to remove motor torque and command the brake circuit without separate relay modules.
Frequently Asked Questions about HCS01.1E-W0008-A-03-A-CC-EC-ET-L4-NN-FW:
Q: What communication interface is available on the HCS01.1E-W0008-A-03-A-CC-EC-ET-L4-NN-FW controller?
A: The HCS01.1E-W0008-A-03-A-CC-EC-ET-L4-NN-FW supports SERCOS III master cross communication, allowing integration into advanced automation environments.
Q: What type of cooling method is used in the HCS01.1E-W0008-A-03-A-CC-EC-ET-L4-NN-FW drive controller?
A: This model features an internal air cooling system with an integrated blower, providing efficient thermal management without external cooling.
Q: What is the second interface type supported by the HCS01.1E-W0008-A-03-A-CC-EC-ET-L4-NN-FW drive controller?
A: The controller supports MultiEthernet as its secondary interface, enabling flexible network integration options.
Q: What is the device peak current for the HCS01.1E-W0008-A-03-A-CC-EC-ET-L4-NN-FW?
A: This drive controller provides a peak current rating of 8 A to support demanding load cycles.
Q: What safety interfaces are featured on the HCS01.1E-W0008-A-03-A-CC-EC-ET-L4-NN-FW controller?
A: The safety interface includes STO (Safe Torque Off) and SBC (Safe Brake Control), enhancing operational safety.
