Product Description:

The HCS01.1E-W0008-A-03-A-CC-EC-EM-NN-NN-FW is a drive controller produced by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. The unit serves as the regulating element between the incoming power source and connected servomotors. It delivers closed-loop motion control for industrial automation cells that require precise speed and torque regulation. It is suited for servo axes that need coordinated acceleration, steady-state speed control, and repeatable response during changing load conditions.

For electrical compatibility, the controller accepts a three-phase supply of 3 x AC 200...500 V ±10%. Its output stage supports up to 8 A of device peak current. The housing carries an IP20 rating, so it must be installed inside a protected cabinet that is free of conductive dust. Heat is removed by internal air cooling through an integrated blower, which circulates ventilation air across the heat sink without external fans. The built-in control section uses the ADVANCED design version 1, and the unit is part of the compact HCS01 line. This arrangement keeps the enclosure compact and supports cabinet installation with standard ventilation clearance.

Axis coordination is handled by the SERCOS III master with cross communication port, which provides cyclic exchange of setpoints and status data with neighboring drives. Position feedback connects to Interface 1 through the IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface, while Interface 2 provides encoder emulation signals for controllers that require incremental or analog feedback. This layout lets the drive exchange motion data and return position information without requiring a separate feedback module. The power section supports infeeding and fed operation, so the module can either supply energy to a shared DC link or draw from it. The safety interface is not equipped, so functional stop circuits must be provided externally.