Product Description:

Bosch Rexroth Indramat builds the HCS01.1E-W0008-A-03-A-CC-EC-CN-L3-NN-FW for the HCS IndraDrive Controllers series. This HCS drive controller belongs to the HCS01 line, is supplied as design version 1, and is intended for cabinet installation in multi-axis automation. Within an automation system, it provides the power and logic needed to modulate motor torque, speed, and position in response to motion commands from the higher-level control system. It is suited for enclosed drive assemblies where coordinated axes operate from a common platform across the machine.

The power section accepts a three-phase input of 3 x AC 200–500 V ±10% and can deliver up to 8 A of peak current to the connected motor. Heat generated by the IGBTs is removed through internal air cooling through an integrated blower, so no external ducting is required. An infeeding and regenerative power supply unit handles energy exchange with the DC bus and supports controlled regeneration during deceleration. The housing has an IP20 rating, making it suitable for mounting inside a protected electrical cabinet where finger-safe construction is still necessary. Functional safety is addressed through the STO (Safe Torque Off) interface, which removes drive energy without disrupting fieldbus activity. This arrangement matches the series recommendation for the control section.

High-speed axis coordination is handled over a SERCOS III master channel that also supports cross-communication between drives. Local diagnostics and parameter access are supplemented by a fieldbus port that uses CANopen. Feedback from motors equipped with single-turn or multi-turn transducers enters through the IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface, enabling absolute position acquisition at startup. The ADVANCED control section provides the processing capacity needed for interpolation and fast internal control loops during coordinated motion.