HCS01.1E-W0006-A-02-E-S3-EC-NN-NN-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911328424
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0006-A-02-E-S3-EC-NN-NN-NN-FW is a drive controller from the HCS IndraDrive Controllers series with a peak device current of 6 Amps and IP20 protection rating. It supports a SERCOS III communication interface and uses an internal air cooling method through an integrated blower. The drive controller is designed for a mains voltage of 3 x AC 110 to 230 Volts.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0006-A-02-E-S3-EC-NN-NN-NN-FW is a drive controller built by Bosch Rexroth Indramat and supplied within the HCS IndraDrive Controllers series. It serves as the power-processing and motion-control element in multi-axis automation, translating command data into regulated motor currents for servo and induction motor stages. This allows coordinated axes to respond quickly to command changes while maintaining stable speed and torque control during machine operation.
Electrical supply is accepted from a three-phase mains input of 3 × AC 110–230 V ±10%, matching low-voltage factory grids. At full modulation, the power unit can deliver a device peak current of 6 A for short-term dynamic demand. Heat generated during switching is removed by internal blower cooling, which circulates air through integrated channels to keep semiconductor temperatures within limits. The housing carries an IP20 ingress rating, so the unit must be installed in a protected enclosure. Real-time motion commands reach the controller over the deterministic SERCOS III network, which supports synchronous communication with central PLCs. The power section can be used within different supply topologies of the HCS01 platform.
The control electronics fitted to this unit follow the ECONOMY design concept, meaning optional functions are minimized while maintaining compatibility with the same E-section control platform. Position feedback is accepted through the multifunction encoder port that supports IndraDyn Hiperface/EnDat 2.1/2.2 protocols, while a second interface slot is left empty and the safety interface is not equipped. Power exchange with a common DC bus is handled by the integrated supply section for infeeding or fed operation, which enables energy sharing between axes. This hardware release carries Design Version 1.
Frequently Asked Questions about HCS01.1E-W0006-A-02-E-S3-EC-NN-NN-NN-FW:
Q: What communication interface does the HCS01.1E-W0006-A-02-E-S3-EC-NN-NN-NN-FW use?
A: The HCS01.1E-W0006-A-02-E-S3-EC-NN-NN-NN-FW supports a SERCOS III communication interface for system connectivity.
Q: What is the device peak current of the HCS01.1E-W0006-A-02-E-S3-EC-NN-NN-NN-FW?
A: This drive controller operates with a device peak current of 6 A.
Q: What cooling method does the HCS01.1E-W0006-A-02-E-S3-EC-NN-NN-NN-FW utilize?
A: The HCS01.1E-W0006-A-02-E-S3-EC-NN-NN-NN-FW uses internal air cooling through an integrated blower.
Q: What IP rating does the HCS01.1E-W0006-A-02-E-S3-EC-NN-NN-NN-FW feature?
A: This controller has an IP20 rating, offering limited protection against solid objects but not water.
Q: What mains voltage range is supported by the HCS01.1E-W0006-A-02-E-S3-EC-NN-NN-NN-FW?
A: The mains voltage range for this drive controller is three-phase AC 110 to 230 volts with a tolerance of ±10%.
