HCS01.1E-W0006-A-02-E-S3-EC-NN-L3-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911340426
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0006-A-02-E-S3-EC-NN-L3-NN-FW is a drive controller from the HCS IndraDrive Controllers series. It features a SERCOS III communication interface, an ECONOMY control section design, and supports a device peak current of 6 Amps. This controller uses air cooling through an integrated blower and operates at an input voltage range of 3 x AC 110 to 230 Volts with an IP20 rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0006-A-02-E-S3-EC-NN-L3-NN-FW drive controller is manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. It functions as the axis inverter in small-power motion platforms, converting an incoming three-phase supply into regulated motor current while exchanging status data with higher-level automation. Industrial users place this unit between a PLC and a synchronous or asynchronous motor to obtain closed-loop speed and torque regulation across conveyors, handling modules, and compact machining cells.
To integrate with modern control architectures, the device communicates over SERCOS III, allowing deterministic cyclic data exchange at gigabit rates. It accepts a supply of 3 x AC 110...230 V ±10%, which makes it compatible with worldwide low-voltage mains. When a load surge occurs, the inverter can deliver a device peak current of 6 A, giving short-term torque support to the connected motor. Thermal energy is discharged through internal air cooling driven by an integrated blower, so no external heat sink is required. The housing is rated at IP20, so the controller must be mounted inside a protected cabinet to reduce exposure to conductive dust and accidental contact.
Functional safety is handled by the dual-channel STO interface, which interrupts the power stage to help prevent unintended motion without relying on mechanical relays. Feedback from motors is acquired through the single-cable Encoder IndraDyn Hiperface/EnDat 2.1/2.2 port, which supports responsive servo control, and a second feedback channel is not equipped. The unit is Design Version 1 and uses the ECONOMY control section for standard-duty operation. It supports both infeeding and fed-back power operation, which allows the controller to work with applications that exchange energy with the supply during dynamic motion.
Frequently Asked Questions about HCS01.1E-W0006-A-02-E-S3-EC-NN-L3-NN-FW:
Q: What communication protocol does the HCS01.1E-W0006-A-02-E-S3-EC-NN-L3-NN-FW support?
A: The HCS01.1E-W0006-A-02-E-S3-EC-NN-L3-NN-FW controller communicates using the SERCOS III interface.
Q: How is the HCS01.1E-W0006-A-02-E-S3-EC-NN-L3-NN-FW cooled?
A: This drive controller features an internal air cooling method with an integrated blower.
Q: What is the peak current provided by the HCS01.1E-W0006-A-02-E-S3-EC-NN-L3-NN-FW?
A: The device provides a peak current of 6 A for demanding operations.
Q: Which encoder interfaces are available on interface 1 of this drive controller?
A: The controller supports encoder interfaces including IndraDyn Hiperface and EnDat 2.1/2.2 on its first interface port.
Q: What level of environmental protection does the HCS01.1E-W0006-A-02-E-S3-EC-NN-L3-NN-FW have?
A: The HCS01.1E-W0006-A-02-E-S3-EC-NN-L3-NN-FW offers an IP20 rating, providing basic protection against solid objects.
