HCS01.1E-W0006-A-02-E-S3-EC-EP-L4-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911383415
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
38 Seconds
The Bosch Rexroth Indramat HCS01.1E-W0006-A-02-E-S3-EC-EP-L4-NN-FW is an HCS Drive Controller from the HCS IndraDrive Controllers series, designed with an ECONOMY control section. It features a SERCOS III communication interface, air cooling through an integrated blower, and supports encoder connections including IndraDyn Hiperface and EnDat 2.1/2.2. The drive controller operates with a device peak current of 6 Amps, a mains voltage of 3 x AC 110 to 230 Volts, and has IP20 protection with STO and SBC safety interfaces.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0006-A-02-E-S3-EC-EP-L4-NN-FW belongs to the HCS IndraDrive Controllers series manufactured by Bosch Rexroth Indramat. As a drive controller, it supplies regulated power to synchronous or induction motors and exchanges motion commands with higher-level PLCs in automated cells. Its compact housing is intended for cabinet installation, where it can be placed with other HCS01 units to coordinate axis speed, torque, and stop functions during normal and safety-related operation. This layout is useful in multi-axis systems that need centralized drive placement within a limited cabinet footprint.
The controller accepts a three-phase mains supply of 3 × AC 110…230 V ±10% and can deliver up to 6 A of peak current during short acceleration events. Its enclosure carries an IP20 rating, so the unit is intended for use inside filtered control cabinets while still allowing accessible wiring and heat dissipation. For real-time drive networking, it uses the SERCOS III communication interface, allowing deterministic cyclic data exchange with multi-axis motion systems. Integrated functional safety is provided through STO (Safe Torque Off) and SBC (Safe Brake Control), and these hardware channels remove torque-producing energy while commanding the motor brake during emergency stops without relying on software.
The unit uses the ECONOMY control section for standard drive tasks while retaining diagnostic feedback. Position feedback is handled by the IndraDyn Hiperface/EnDat 2.1/2.2 encoder interface, so the same controller can work with several compatible encoder formats without extra option cards. Power is supplied through an infeed/feed link, allowing drives in the same cabinet to share DC-bus energy. Cooling is provided by internal air cooling through an integrated blower, which moves cabinet air across the heat sinks and avoids the need for external ducting. This cooling method suits compact control cabinets where several drive axes are grouped in one section.
Frequently Asked Questions about HCS01.1E-W0006-A-02-E-S3-EC-EP-L4-NN-FW:
Q: What communication interface is available on the HCS01.1E-W0006-A-02-E-S3-EC-EP-L4-NN-FW controller?
A: The HCS01.1E-W0006-A-02-E-S3-EC-EP-L4-NN-FW supports the SERCOS III communication interface for network integration.
Q: How is the HCS01.1E-W0006-A-02-E-S3-EC-EP-L4-NN-FW cooled during operation?
A: This drive controller features an internal air cooling system utilizing an integrated blower.
Q: What is the peak current output for the HCS01.1E-W0006-A-02-E-S3-EC-EP-L4-NN-FW drive controller?
A: The device has a peak output current of 6 A, suitable for low to mid-power servo applications.
Q: What is the IP rating for the HCS01.1E-W0006-A-02-E-S3-EC-EP-L4-NN-FW controller?
A: This model has an IP20 rating, which provides protection against solid objects but not against water.
Q: What safety interface features are present on the HCS01.1E-W0006-A-02-E-S3-EC-EP-L4-NN-FW?
A: The safety interface includes STO (Safe Torque Off) and SBC (Safe Brake Control) features for enhanced operational safety.
