Product Description:

The HCS01.1E-W0006-A-02-B-ET-EC-PB-L3-NN-FW is a drive controller produced by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. It provides closed-loop regulation and diagnostics for compact machinery, linking mains power to servo motors while coordinating with supervisory automation systems. The device is intended for cabinet integration where internal airflow is available, and it modulates current and voltage to meet real-time motion commands in industrial production lines.

It accepts a three-phase supply of 3 × AC 110–230 V ±10% and internally converts this energy before distributing it to the power inverter. Peak output current is limited to 6 A, so the unit must be matched with motors whose acceleration demands remain within that limit. The control section uses a BASIC design that handles parameter storage, motion functions, and the safety channel. Field networking is consolidated on the MultiEthernet port, allowing selection among several Ethernet-based protocols without hardware changes. The housing meets an IP20 rating, which provides finger-safe accessibility but requires mounting in an enclosed cabinet. Internal air movement is provided by an integrated blower, so additional external fans are unnecessary as long as cabinet ambient temperature remains within the permissible limit.

Motor feedback is connected through the Encoder IndraDyn Hiperface/EnDat 2.1/2.2 interface, enabling automatic electronic nameplate reading and high-resolution position capture. A second communication layer, PROFIBUS, supports legacy controller installations that still rely on RS-485 fieldbus cabling. Drive disable is implemented with the certified STO (Safe Torque Off) input, which removes gate signals to the power stage without affecting parameter memory. The power module supports infeeding or fed operation, meaning it can either supply DC bus energy or receive it from upstream units for multi-axis energy sharing and controlled regeneration into the supply network.