HCS01.1E-W0006-A-02-B-ET-EC-NN-S4-NN-AW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911396982
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0006-A-02-B-ET-EC-NN-S4-NN-AW is part of the HCS IndraDrive Controllers series and serves as an HCS drive controller. It features a MultiEthernet communication interface and supports encoder connectivity through IndraDyn Hiperface or EnDat 2.1 and 2.2 interfaces. The unit uses internal air cooling via an integrated blower, offers an IP20 rating, and supports a device peak current of 6 Amps at a mains voltage of 3 x AC 110 to 230 Volts.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0006-A-02-B-ET-EC-NN-S4-NN-AW drive controller is produced by Bosch Rexroth Indramat within the HCS IndraDrive Controllers series. It is configured for small-to-medium axes, where it processes reference commands and modulates power for connected servo motors and induction motors in automated machinery. By combining control electronics with an integrated power stage, the unit links higher-level PLCs with motion hardware and allows position, speed, or torque control in a compact cabinet layout. This arrangement supports coordinated machine movements such as indexing, conveying, and positioning without requiring a separate external amplifier module.
For I/O, its MultiEthernet communication backplane carries control data over PROFINET, EtherNet/IP, or EtherCAT without accessory modules. This network flexibility lets the same hardware connect to different control architectures. The power section is fed from a three-phase supply of 110-230 V AC with a tolerance of ±10%, allowing operation on low-voltage utility grids. When acceleration peaks occur, the inverter can deliver up to 6 A of peak current to the motor windings. Thermal energy is removed by internal air cooling through an integrated blower, and the IP20 housing helps limit access to live parts inside control cabinets. The unit is Version 1.
The control section carries the BASIC designation, which means only the core motion functions are enabled and no optional safety extensions are included. Position feedback is accepted through the Encoder IndraDyn Hiperface/EnDat 2.1/2.2 port, allowing direct wiring of compatible Rexroth rotary or linear encoders without external converters. A second feedback channel is not included, which keeps the interface focused on single-feedback applications. Energy is exchanged with the DC bus through a shared DC-bus infeed arrangement, so the drive can either supply or absorb regenerative power when used with neighboring controllers in a common supply scheme. That arrangement supports energy sharing across multi-axis systems during deceleration and load changes.
Frequently Asked Questions about HCS01.1E-W0006-A-02-B-ET-EC-NN-S4-NN-AW:
Q: What communication interface does the HCS01.1E-W0006-A-02-B-ET-EC-NN-S4-NN-AW support?
A: This model operates with a MultiEthernet communication interface, enabling connectivity with multiple industrial protocols.
Q: Which encoder interfaces are available on the HCS01.1E-W0006-A-02-B-ET-EC-NN-S4-NN-AW drive controller?
A: The device supports an encoder interface compatible with IndraDyn Hiperface and EnDat 2.1/2.2 standards.
Q: How is the HCS01.1E-W0006-A-02-B-ET-EC-NN-S4-NN-AW cooled during operation?
A: The controller features an internal air cooling method using an integrated blower.
Q: What is the peak current capacity of the HCS01.1E-W0006-A-02-B-ET-EC-NN-S4-NN-AW?
A: This device offers a peak current of 6 A, supporting medium-power drive applications.
Q: What mains voltage does the HCS01.1E-W0006-A-02-B-ET-EC-NN-S4-NN-AW support?
A: The mains voltage range for this drive controller is 3 x AC 110 to 230 V with a tolerance of ±10%.
