Product Description:

The HCS01.1E-W0006-A-02-B-ET-EC-NN-NN-AA-FW is a compact HCS drive controller manufactured by Bosch Rexroth Indramat for the HCS IndraDrive Controllers series. The unit combines power conversion, axis control, and field communication, allowing small servo motor stations to be governed directly from a PLC without separate converters. Within an automation cell, it supervises torque, speed, and position loops, exchanges real-time data with the machine logic, and issues protective trips whenever electrical or thermal limits are approached. Because it operates on low-voltage three-phase mains, it suits packaging lines, handling modules, and electronic assembly platforms that do not require high-kilowatt outputs.

The power stage accepts a three-phase input of 3 x AC 110...230 V ±10%, letting the controller run from factory panels without a transformer. From that supply, it can deliver up to 6 A of peak output current during acceleration or regenerative events. Thermal management relies on internal air cooling through an integrated blower, and a built-in fan moves enclosure air across the heat sink. Component protection is rated at IP20, so the unit must be installed inside a cabinet but is protected against accidental finger contact and large objects. Motion data reach the network through MultiEthernet, which supports common real-time Ethernet communication options.

The control electronics use the BASIC design section referenced in the type code, and the unit belongs to the HCS01 line. Feedback connectivity is provided through a universal encoder port for IndraDyn Hiperface and EnDat 2.1/2.2. Interface 2 and the safety interface are not equipped, which helps keep the footprint small. The internal DC link uses an infeed/feed topology, which allows regenerative energy from one axis to supply another and reduces external braking demand.